Was absorbiert bei 1660 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1660 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1660 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 93 | 79 | 1,0 |
| Carbonyl (C=O) | 51 | 45 | 1,0 |
| Methacrylate | 32 | 28 | 1,0 |
| Acetate | 32 | 28 | 1,0 |
| Carboxyl (COOH) | 29 | 25 | 1,0 |
| Ester | 27 | 23 | 1,0 |
| Ketone | 26 | 22 | 1,0 |
| N h | 14 | 13 | 1,0 |
| Secondary amine | 12 | 12 | 1,0 |
| Alkene (C=C) | 9 | 9 | 1,0 |
| Protein | 8 | 8 | 1,0 |
| Methoxy (OCH3) | 8 | 7 | 1,0 |
| C-O single bond | 8 | 7 | 1,0 |
| Hydroxyl (O-H) | 7 | 7 | 1,0 |
| C n single bond | 7 | 7 | 1,0 |
| Protein alpha helix | 7 | 6 | 1,0 |
| Protein beta turn | 5 | 5 | 1,0 |
| Hydrogen bond | 4 | 4 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Lignin | 2 | 2 | 1,0 |
| Ammonium | 2 | 2 | 1,0 |
| Protein random coil | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Water (H2O) | 2 | 2 | 1,0 |
| C=n | 2 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 0,6 |
| Phosphorus | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
| Imide | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| epoxy | 1660, 1735, 1035 | Methacrylate, Acetate, Amide | 1 |
| PANI | 1660, 2930, 1300 | Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1660 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
N h Vertrauen 1,0
“PG100 film at 2856 The carbonyl C=O double bond stretching mode dominates the amide I band, with contributions from the CN stretch, CCN deformation and in-plane NH bending modes and is mostly found in the region of 1660 cm-1 to 1620 cm-1, w”
Application of Poultry Gelatin to Enhance the Physicochemical, Mechanical, and Rheological Properties of Fish Gelatin as Alternative Mammalian Gelatin Films for Food Packaging DOI: 10.3390/foods12030670 -
Bromine Vertrauen 1,0
“cm-1is (cid:3) at 1435 assigned to the 4(F) bending mode of Brönsted acid (cid:3) bound ammonium ions [49,51,53], but the corresponding sites 2 cm-1 (E) vibration mode is absent at 1660 [59].”
Low-temperature selective catalytic reduction of NO with NH3 over V/ZrO2 prepared by flame-assisted spray pyrolysis: Structural and catalytic properties DOI: 10.1016/j.apcatb.2012.08.012 -
Alkene (C=C) Vertrauen 1,0
“The band at 1660 can be attributed to the -C=Cstretching vibration of alkenes cm-1 [36].”
Mesoporous magnetite nanoparticles synthesis using the Peltophorum pterocarpum pod extract, their antibacterial efficacy against pathogens and ability to remove a pollutant dye DOI: 10.1016/j.molstruc.2018.10.042 -
Carbonyl (C=O) Vertrauen 1,0
“Young and Chang [15] studied the FTIR changes of PMR-15 after thermal spiking and also observed this change along with the ingrowth cm(cid:2)1, of peaks at 1660 and 930 both arising from the bridging carbonyl group.”
Fox 等 - 2004 - Investigation of failure mechanisms in aged aerosp DOI: 10.1016/j.engfailanal.2003.05.010 -
Alkene (C=C) Vertrauen 1,0
“The intense FT-IR peaks at cm-1 1660 and 3461 of GQDs spectrum reveals the presence of a C=C and an O-H stretching, in that order.”
Gebreegziabher 等 - 2020 - Polyaniline-graphene quantum dots (PANI-GQDs) hybr DOI: 10.1007/s42823-019-00064-6 -
Acetate Vertrauen 1,0
“The first was at 1717 which cm-1 refers to (C O) group of a free aldehyde end of glutaraldehyde, and another peak was at 1660 Keywords: referring to (C N ) group.”
Covalent immobilization of Enterococcus faecalis Esawy dextransucrase and dextran synthesis DOI: 10.1016/j.ijbiomac.2015.09.076 -
Amide Vertrauen 1,0
“Moreover, the FTIR Electron irradiation cm-1, spectra showed higher intensities of the peaks at 1660 and 1720 which are attributed to stretching rate effect Dose vibrations of amide C O and ketone/acid C O, at lower dose rates.”
Dose rate effects on shape memory epoxy resin during 1 MeV electron irradiation in air DOI: 10.1016/j.jmst.2020.06.020 -
Amide Vertrauen 1,0
“The peaks at 1692 1687 (-) cm-1 77 and 100 K are enlarged by 1/0.36 and 1/0.64, respectively, and 1673 can be attributed to the amide I vibrations (+) (-) to normalize the population of D447 photoconverted to S390 of turn structure, and the”
Iwata 等 - 2003 - Light-induced structural changes in the LOV2 domai DOI: 10.1021/bi0345135
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.