C n single bond — FTIR absorption peaks and assignments
These are the characteristic FTIR wavenumbers where C n single bond tends to absorb, compiled from published literature and ranked by supporting evidence. Each assignment is traceable to a source (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Quick answer
C n single bond is usually assigned by looking for a recurring cluster of characteristic peaks rather than one exact textbook number. The table below shows where the literature most often places this group in FTIR, ranked by accumulated evidence.
Characteristic FTIR peaks for C n single bond
| Wavenumber (cm⁻¹) | Supporting facts | Cited sources | Top confidence |
|---|---|---|---|
| 1650 | 16 | 16 | 1.0 |
| 1550 | 16 | 14 | 1.0 |
| 1240 | 16 | 14 | 1.0 |
| 1250 | 12 | 10 | 1.0 |
| 1380 | 10 | 8 | 1.0 |
| 1510 | 10 | 8 | 1.0 |
| 1310 | 9 | 9 | 1.0 |
| 1200 | 9 | 9 | 1.0 |
| 1600 | 9 | 9 | 1.0 |
| 1370 | 9 | 9 | 1.0 |
| 1545 | 9 | 8 | 1.0 |
| 1290 | 9 | 8 | 1.0 |
| 1300 | 9 | 8 | 1.0 |
| 1540 | 8 | 8 | 1.0 |
| 1242 | 8 | 8 | 1.0 |
| 1400 | 7 | 7 | 1.0 |
| 1384 | 7 | 7 | 1.0 |
| 1660 | 7 | 7 | 1.0 |
| 1350 | 7 | 7 | 1.0 |
| 1244 | 7 | 7 | 1.0 |
| 1450 | 7 | 7 | 1.0 |
| 1120 | 7 | 7 | 1.0 |
| 1171 | 7 | 6 | 1.0 |
| 1560 | 6 | 6 | 1.0 |
| 1340 | 6 | 6 | 1.0 |
| 1260 | 6 | 6 | 1.0 |
| 1544 | 6 | 6 | 1.0 |
| 1301 | 6 | 6 | 1.0 |
| 1080 | 6 | 6 | 1.0 |
| 1652 | 6 | 6 | 1.0 |
Showing the 30 best-supported peaks of 768 total for C n single bond.
Possible materials
Spectrum logic
A functional-group assignment becomes more confident when several expected bands appear together. Use this page to find the strongest-supported peaks, then confirm that the same sample exhibits a coherent pattern rather than a single isolated hit.
Real-world usage
These pages are useful for unknown material analysis, peak explanation in reports, polymer troubleshooting, and verifying whether a candidate material family is chemically plausible.
Common mistakes
- Using one functional-group page as a complete material verdict without checking the rest of the spectrum.
- Assuming the strongest band is always the most diagnostic one.
- Forgetting that processing, additives, aging, and mixtures can shift or broaden expected peaks.
Verification advice
Use DSC, GC-MS, or TGA when several material families share similar bands or when mixture effects make the FTIR assignment uncertain.
Literature behind these assignments
-
1566 cm⁻¹ confidence 1.0
“1566cm-1, R2 due to NH in-plane bending, triazine stretching In every case a, good linear fit was obtained with valand C-N stretching, respectively, [23] and so, these bands ues >0.999.”
Armenta 等 - 2004 - Determination of cyromazine in pesticide commercia DOI: 10.1016/j.aca.2004.02.063 -
968 cm⁻¹ confidence 1.0
“2000cm-1, 1.21mgg-1 baseline established in for a ChlorThe absorption bands of Chlorpyrifos are located at 1549, pyrifosstandardandthenoisemeasuredinthesameregionfor 968cm-1, 1412, 1339, 1165, 1088, 1025 and due to C N a blank spectrum and”
Armenta 等 - 2005 - A validated and fast procedure for FTIR determinat DOI: 10.1016/j.talanta.2005.03.008 -
1413 cm⁻¹ confidence 1.0
“The absorption bands 1413 cm-1 3-, cm-1 cm-1 at 815.25 and 728.12 were assigned to the N-O bending vibration of NO and to C-N at 815.25 cm-1 and 728.12 cm-1 were assigned to the N-O bending vibration of NO3-, and to C-N stretching from the”
Effect of Ratio in Ammonium Nitrate on the Structural, Microstructural, Magnetic, and AC Conductivity Properties of BaFe12O19 DOI: 10.3390/ma11112190 -
1740 cm⁻¹ confidence 1.0
“Nevertheless, the stretching vibrations of C=O cm-1, bond [34], C-O bond [34, 35] and C-N bond [35] are found at peak positions of 1740 1375 cm-1”
Aziz 等 - 2023 - Water remediation capability of cubic-phase CdS na DOI: 10.15251/DJNB.2023.181.203 -
1176 cm⁻¹ confidence 1.0
“spectra of the PDPA in doped state, these being peaked at 1176, 1201, 1368, 1541 and 1603 These Raman lines were attributed to vibrational modes of C-H bending in benzene ring, C-N stretching, semi-quinoid”
Baibarac 等 - 2019 - Adsorption of 1,4-phenylene diisothiocyanate onto DOI: 10.1038/s41598-019-48314-x -
783 cm⁻¹ confidence 1.0
“the FTIR spectra of as prepared PPy showed the important characteristic cm-1, peaks at 783 which corresponds C-N vibration.”
Highly Biological Active Antibiofilm, Anticancer and Osteoblast Adhesion Efficacy from MWCNT/PPy/Pd nanocomposite DOI: 10.1016/j.apsusc.2017.10.142 -
1112 cm⁻¹ confidence 1.0
“Furthermore, PPy/rGO shows the additional bands at 1112 and 814 attributed to the C-N and N-H stretching band of the PPy ring [59, 60].”
Fabrication of Palladium Nanoparticles Anchored Polypyrrole Functionalized Reduced Graphene oxide Nanocomposite for Antibiofilm Associated Orthopedic Tissue Engineering DOI: 10.1016/j.apsusc.2020.145403 -
3267 cm⁻¹ confidence 1.0
“(-CONH2), and aromatic amine (C-N), respectively, present Increase in frequency of CS-SP peaks at 3267.39 and 1635.58cm-1 in chitosan.”
Bande 等 - 2015 - Synthesis and Characterization of Chitosan-Saponin DOI: 10.1155/2015/371529
See C n single bond in your own spectrum
Upload your FTIR spectrum and get a full interpretation report — peak assignments with literature citations, library matches, and a literature-backed analysis — in seconds.