Was absorbiert bei 1640 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1640 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1640 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PMMA | 1640, 1722, 1383 | Carbonyl (C=O) | 1 |
| PET | 1640, 1408, 800 | Amide, Carbonyl (C=O) | 1 |
| Cellulose | 1640, 1735, 1650 | Hydroxyl (O-H), Amide | 1 |
| Methacrylate | 1640, 873, 1725 | Carbonyl (C=O), Hydroxyl (O-H) | 1 |
| nanotube | 1640, 1540, 1080 | Amide, Hydroxyl (O-H) | 1 |
| SiO2 | 1640, 1739, 699 | Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1640 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkene (C=C) Vertrauen 1,0
“cm-1 In all spectra of samples C0-C3, the peak that appear at ~1640 can be assigned to cm-1 C=C and corresponded to the bonded carbonyl groups, and the peak at 1737 related to the free carbonyl groups [40-42].”
Study of Polyvinyl Alcohol-SiO2 Nanoparticles Polymeric Membrane in Wastewater Treatment Containing Zinc Ions DOI: 10.3390/polym13111875 -
Hydroxyl (O-H) Vertrauen 1,0
“Nevertheless, considering the absorbed moisture amount observation, the peak at approximately 1640 cm-1 is more appropriate to analyze, as it is assigned to H-O-H angle vibrations Materials2020,13,4573 7of22 in water molecules [35].”
IR Study on Cellulose with the Varied Moisture Contents: Insight into the Supramolecular Structure DOI: 10.3390/ma13204573 -
Urea Vertrauen 1,0
“Furthermore, the sharp peak at 1640 cm-1, amine-isocyanate generated by the ing at 1640 is attributed to the urea bond created by the reaction reaction, could not be found in the spectrum of the between the amine group and HDI.”
Cohn 和 Stern - 2000 - Sequential surface derivatization of PET films DOI: 10.1021/ma9900784 -
Acetate Vertrauen 1,0
“cm-1 to the C=O stretching mode of the PMMA changed into a doublet of 1725 and 1640 cm-1 Li+ confirming the formation of ion-dipolar coordination between the and C=O in”
Effects of different inorganic nanoparticles on the structural, dielectric and ion transportation properties of polymers blend based nanocomposite solid polymer electrolytes DOI: 10.1016/j.electacta.2017.07.051 -
Acetate Vertrauen 1,0
“They showed intense quantitative FTIR analyses included the applications of Fourier self1730cm-1) C=O peaks (centered at approximately deconvolution, area integration methods, and the calculation of area indicating 1640cm-1 ratios (e.g., D'”
Fossil cutin of Johnstonia coriacea (Corystospermaceae, Upper Triassic, Cacheuta, Argentina) DOI: 10.1016/j.coal.2018.02.016 -
Water (H2O) Vertrauen 1,0
“The absorption at ~1640 here that area covered under crystalline and amorphous may be related to bending mode of absorbed water and phase may not be the best parameter to use since it is cr/ carbonyl groups of hemicelluloses [49-51].”
Das 等 - 2017 - Extraction of xylem fibers from Musa sapientum and DOI: 10.1007/s12221-017-1187-5 -
Metal oxygen Vertrauen 1,0
“However, as O-H bending vibrations absorb in the same region, cm-1 and spectral contributions of carbonyl groups may affect the 1640 peak, alternative peak cm-1 selections are recommended [15].”
Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures DOI: 10.1371/journal.pone.0252999 -
Amide Vertrauen 1,0
“FTIR spectrum of these conjugated nanotubes showed an additional peak at 1640 cm-1 corresponding to amide II vibration which is due to reaction of carboxylic groups of FA”
Covalent diphenylalanine peptide nanotube conjugated to folic acid/magnetic nanoparticles for anti-cancer drug delivery DOI: 10.1016/j.jddst.2017.06.005
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.