How can you identify PMMA from FTIR?
This page summarizes the recurring FTIR evidence reported for PMMA, including the most frequent peaks, supporting functional groups, and literature-backed interpretation patterns. It is a structured evidence page, not a claim of automatic single-spectrum certainty.
Backed by 34 cited sources
Quick answer
PMMA is usually reported with a recurring pattern of peaks and functional-group evidence. The most useful approach is to cross-check at least two characteristic peaks before treating it as a match, then verify whether the full spectrum still fits the same material family.
Peak interpretation
Possible materials / groups
| Functional group | Evidence |
|---|---|
| Alkyl C-H | 52 |
| Methacrylate | 50 |
| Acetate | 50 |
| Methoxy (OCH3) | 39 |
| C-O single bond | 30 |
| Carbonyl (C=O) | 27 |
| Carboxyl (COOH) | 22 |
| Ester | 20 |
Spectrum logic
The logic here is evidence aggregation: repeated literature mentions of PMMA, repeated peak positions, and repeated functional-group associations. A strong material hypothesis should still be supported by multiple peaks that agree with each other, not by one headline band alone.
Real-world usage
This page is designed for polymer identification, incoming-material QC, unknown plastic analysis, recycled-content review, and literature-backed interpretation of reference spectra.
Common mistakes
- Calling a material match too early because one famous peak is present.
- Ignoring sample prep, fillers, oxidation, water, or additives that can change the apparent pattern.
- Using literature evidence without checking whether your own sampling mode and spectrum quality are comparable.
Verification advice
Use DSC, GC-MS, or TGA to validate the material hypothesis when the peak pattern is ambiguous or mixed.
Literature behind this page
-
confidence 7.1
PMMA
Correlation of lithographic performance of the electron beam resists SML and ZEP with their chemical structure DOI: 10.1116/1.4926387 -
confidence 7.1
PMMA
Ramesh 等 - 2007 - FTIR studies of PVCPMMA blend based polymer elect DOI: 10.1016/j.saa.2006.06.012 -
confidence 7.1
PMMA
Effect of Al2O3 in poly(methyl methacrylate) composite polymer electrolytes DOI: 10.1063/1.5034559 -
confidence 7.1
PMMA
The Effect of AlI3 Nanoadditive on the Thermal Behavior of PMMA Subjected to Thermoanalytical Py-GC-MS Technique DOI: 10.3390/ma14227036 -
confidence 7.1
PMMA
FTIR in situ measurement of swelling and CO2 sorption in acrylic polymers at high CO2 pressures DOI: 10.1016/j.supflu.2022.105534 -
confidence 7.1
PMMA
Effects of selected solvents on PMMA after prolonged exposure: unilateral NMR and ATR-FTIR investigations DOI: 10.1186/s40494-023-00881-z -
confidence 7.1
PMMA
Mester 等 - 2020 - Subsurface chemical nanoidentification by nano-FTI DOI: 10.1038/s41467-020-17034-6 -
confidence 7.1
PMMA
Polymer Masks Fabrication by Micropatterning Surfaces of Composite Polymer Coatings DOI: 10.1163/156856111X623113 -
confidence 7.1
PMMA
Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr(VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption DOI: 10.3390/ma14226923 -
confidence 5.9
PMMA
Electrosprayed PMMA microcapsules containing green soybean oil-based acrylated epoxy and a thiol: a novel resin for smart self-healing coatings DOI: 10.1088/1361-665X/ab9754
See PMMA in your own spectrum
Upload your FTIR spectrum and get AI-assisted polymer analysis and peak-by-peak interpretation from your own spectrum.
