Was absorbiert bei 1260 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1260 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1260 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 22 | 19 | 1,0 |
| Methacrylate | 18 | 17 | 1,0 |
| Acetate | 18 | 17 | 1,0 |
| Methoxy (OCH3) | 16 | 15 | 1,0 |
| C-O single bond | 16 | 13 | 1,0 |
| Silicon carbon | 13 | 12 | 1,0 |
| Amide | 11 | 11 | 1,0 |
| Silicon (Si) | 8 | 8 | 1,0 |
| Secondary amine | 6 | 6 | 1,0 |
| C n single bond | 6 | 6 | 1,0 |
| Phosphate (PO4) | 6 | 4 | 1,0 |
| Carboxyl (COOH) | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Ring structure | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Aromatic ring | 4 | 3 | 1,0 |
| Methyl | 3 | 3 | 1,0 |
| Carbohydrate | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Phosphorus | 3 | 2 | 1,0 |
| N-O bond | 3 | 2 | 1,0 |
| Oxygen heterocycle | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Acetyl | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| S s | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| humic acid | 1260, 1660, 1220 | Alkyl C-H, Methacrylate, Acetate | 1 |
| TiO | 1260, 1730, 1699 | Alkyl C-H, Methacrylate, Acetate | 1 |
| SiO | 1260, 800, 1745 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| TiO2 | 1260, 1700, 1093 | Alkyl C-H, Methacrylate, Acetate | 1 |
| PVA | 1260, 1660, 2930 | Alkyl C-H, Acetate, Methacrylate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1260 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Silicon carbon Vertrauen 1,0
“Due to LiTFSI/ PSx interactions, a slight shifting of 1260cm-1 atῦ Si-CH bending mode = to higher wavenumbers was membrane due to stiffening.”
Cznotka 等 - 2016 - Characterization of semi-interpenetrating polymer DOI: 10.1016/j.ssi.2016.02.016 -
Acetate Vertrauen 1,0
“Absent ≅350+1000 combination band [60] ≅450+795 C-O combination band amide III, stretch of aromatic rings and carboxylic Medium shoulder Absent 1260 SiO2 C-O acids [38], stretching ≅”
FTIR photoacoustic spectroscopy for identification and assessment of soil components_ Chernozems and their size fractions DOI: 10.1016/j.pacs.2020.100162 -
N-O bond Vertrauen 1,0
“At around 1260~1220 the band was assigned indicative of -NO group retention during nitration reaction [37].”
Co-Thermal Oxidation of Lignite and Rice Straw for Synthetization of Composite Humic Substances: Parametric Optimization via Response Surface Methodology DOI: 10.3390/ijerph192416875 -
Carboxyl (COOH) Vertrauen 1,0
“FTIR spectra of water with strong absorbance bands at 3294 and 1640 (a), fulvic acid (SBFA) in solution (b), and the cm-1 difference spectrum revealing a protonated carboxyl band at 1260 (c).”
Lumsdon 和 Fraser - 2005 - Infrared spectroscopic evidence supporting heterog DOI: 10.1021/es050180iCCC -
Alkyl C-H Vertrauen 1,0
“The cm-1 (CH symmetric bending in Sifilms are sufficiently stable if the absorption at 1260 3 2 ACCEPTED MANUSCRIPT cm-1 (CH 3) x) is lower than about 100 [10].”
Peter 等 - 2013 - FTIR analysis of a-SiCNH films deposited by PECVD DOI: 10.1016/j.vacuum.2013.04.014 -
C c single bond Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Sathish 等 - 2013 - Nano Composite PVA-TiO2 Thin Films for OTFTs DOI: 10.4028/www.scientific.net/AMR.678.335 -
Vertrauen 1,0
“Attribute to C-N stretch.”
Improvement of anti-corrosion performance of an epoxy coating using hybrid UiO-66-NH2/carbon nanotubes nanocomposite DOI: 10.1038/s41598-022-14854-y -
Alkyl C-H Vertrauen 1,0
“All of these 1260 cm-1 can be also assigned to C-H bond vibration in the Si-CH group.”
The Influence of Different Types of SiO2 Precursors and Ag Addition on the Structure of Selected Titania-Silica Gels DOI: 10.3390/cryst13050811
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.