Was absorbiert bei 875 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 875 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 875 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonate | 18 | 17 | 1,0 |
| Alkyl C-H | 12 | 12 | 1,0 |
| C-O single bond | 12 | 11 | 1,0 |
| Methacrylate | 10 | 9 | 1,0 |
| Acetate | 10 | 9 | 1,0 |
| Methoxy (OCH3) | 9 | 8 | 1,0 |
| Phosphate (PO4) | 8 | 8 | 1,0 |
| Aromatic ring | 6 | 6 | 1,0 |
| Ring structure | 6 | 6 | 1,0 |
| Metal oxygen | 5 | 4 | 1,0 |
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Carbohydrate | 4 | 4 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Phosphorus | 2 | 2 | 1,0 |
| Lignin | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Oxygen heterocycle | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 1 | 1,0 |
| Silicon (Si) | 2 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Silicon nitrogen | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 875 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Silicon (Si) Vertrauen 1,0
“The 813 band and the 875 shoulders can be unambiguously assigned to the transverse (TO) and the longitudinal (LO) modes of the asymmetric Si-N stretching vibration, respectively.”
Benyahia 等 - 2017 - Evolution of Optical and Structural Properties of DOI: 10.4028/www.scientific.net/JNanoR.49.163 -
Ring structure Vertrauen 1,0
“cm-1 The existence of the epoxide ring in the purified ENR-25 is shown by peak at 875 due to half ring”
Dahham 等 - 2018 - The Influences of Zirconium Dioxide on ENR-25ZrO2 DOI: 10.1088/1742-6596/1019/1/012055 -
Metal oxygen Vertrauen 1,0
“cm-1 the range 600-4000 The characteristic peak observed at 875 which is attributed cm-1 is corresponding to the due to the stretching frequency of Y-O.”
Jayaramaiah 等 - 2015 - Luminescence performance of europium-doped yttrium DOI: 10.1016/j.jlumin.2014.08.003 -
Vertrauen 1,0
“The clean calcium solid The cement treatment changed the leaching behavior of cm-1, showed two peaks at 875 and 712 corresponding to arsenic in the material.”
Jing 等 - 2003 - Immobilization mechanisms of arsenate in iron hydr DOI: 10.1021/es021027gCCC -
Lignin Vertrauen 1,0
“The band at 875 can be assigned to lignin monomers and”
Effects of the biomass moisture content and pelleting temperature on the pressure-induced agglomeration process DOI: 10.1016/j.biombioe.2017.10.029 -
Phosphate (PO4) Vertrauen 1,0
“(cm-1) Wavenumbers Bonds / Vibrations 1057.6 PO4 bond, P=O stretching vibrations 986.2 P-O-P asymmetric stretching bond 875.2 P-O-P asymmetric stretching bond”
Growth and characterization of calcium hydrogen phosphate dihydrate crystals from single diffusion gel technique DOI: 10.1002/crat.200900700 -
Aromatic ring Vertrauen 1,0
“700-900cm-1 860cm-1) The prominent absorption signals at (peaking at 875 and are due to aromatic CHoutofplanedeformation.Anarrow,strongbandiscentredat1540cm-1 whichcouldbeCOOHband.”
Sharma 等 - 2009 - On the affinity of Chuaria-Tawuia complex A multi DOI: 10.1016/j.precamres.2009.04.003 -
Phosphate (PO4) Vertrauen 1,0
“Besides, HPO band at 875 tend 4-2 to decrease as the Mg concentration increased.”
Toibah 等 - 2012 - FTIR Study on Phase Behavior of Magnesium-doped Bi DOI: 10.1063/1.4732476
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.