Was absorbiert bei 850 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 850 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 850 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 11 | 10 | 1,0 |
| Methoxy (OCH3) | 10 | 9 | 1,0 |
| Methacrylate | 10 | 9 | 1,0 |
| Acetate | 10 | 9 | 1,0 |
| C-O single bond | 8 | 8 | 1,0 |
| Aromatic ring | 5 | 5 | 1,0 |
| Amide | 5 | 4 | 1,0 |
| Phosphate (PO4) | 4 | 4 | 1,0 |
| C c single bond | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Metal oxygen | 4 | 3 | 1,0 |
| Hydroxyl (O-H) | 4 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Carbonate | 3 | 3 | 0,9 |
| Secondary amine | 3 | 2 | 1,0 |
| C n single bond | 3 | 2 | 1,0 |
| Silicon nitrogen | 3 | 1 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Amino acid | 2 | 2 | 1,0 |
| Chlorine | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Phosphorus | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Methyl | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 850 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Borate Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dalui 等 - 2008 - Boron phosphide films prepared by co-evaporation t DOI: 10.1016/j.tsf.2007.09.047 -
Silicon nitrogen Vertrauen 1,0
“2(cid:3)1019 [15] Si-N Si-N local distorted 790 stretching 2(cid:3)1019 Si-N N-Si3 asymmetric stretching 850 [15] 2(cid:3)1019 950 [15] Si-N Si-N stretching of H-SiN3 Si-O Si-O symmetric stretching 1040 - [2,16]”
Effect of PECVD silicon oxynitride film composition on the surface passivation of silicon wafers DOI: 10.1016/j.solmat.2011.09.052 -
Aromatic ring Vertrauen 1,0
“Jardine et al., 2015), and are reduced in height andEandFthearomatic/hydroxylratiofromtheunstandardisedspectra.Barcolours whenthesporopolleninisisolated.Inthecurrentstudythisisobserved relatetothelevelofshading:white=open(unshaded)sample,li”
Shedding light on sporopollenin chemistry, with reference to UV reconstructions DOI: 10.1016/j.revpalbo.2016.11.014 -
Phosphate (PO4) Vertrauen 1,0
“The phosphate peaks above 850 °C.”
Lebon 等 - 2008 - Characterization of archaeological burnt bones co DOI: 10.1007/s00216-008-2469-y -
Acetate Vertrauen 1,0
“In the pure rutin spectrum, the transmission peaks observed at 1690, 1235 and and 850 cm-1 were assigned to the C=O stretching vibration of aryl ketones, C-O phenol cm-1 850 were assigned to the C=O stretching vibration of aryl ketones, C-O”
Synthesis of Zinc Oxide Nanoparticles with Bioflavonoid Rutin: Characterisation, Antioxidant and Antimicrobial Activities and In Vivo Cytotoxic Effects on Artemia Nauplii DOI: 10.3390/antiox11101853 -
Alkyl C-H Vertrauen 1,0
“For the degradation of reactive violet (RV) 1 by the ligninolytic enzymes of the strain Ganoderma cupreum AG-1, the peaks at 1,602 and 1,434 cm-1 may be characteristics of C=C aromatic skeletal vibration and azo linkages (-N=N-) on aromatic”
Trichoderma asperellum laccase mediated crystal violet degradation–Optimization of experimental conditions and characterization DOI: 10.1016/j.jece.2016.11.044 -
Metal oxygen Vertrauen 1,0
“The peak visible at 850 is likely appears at 750 Ti-O-Ti to be derived from stretching.”
Sunarso 等 - 2008 - Characterization of hybrid organic and inorganic f DOI: 10.1016/j.ssi.2008.02.066 -
Alkyl C-H Vertrauen 1,0
“In addition, the functionalcm-1, group profile also shows bending vibrations at 850 and 1420 also representing C-H stretching.”
The effect of Ag nanoparticles in Ag/polyvinyl alcohol nanofiber composites DOI: 10.1007/s00289-020-03528-2
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.