Was absorbiert bei 3335 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 3335 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 3335 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 9 | 9 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| N h | 3 | 3 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Urea | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Silicon nitrogen | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 3335, 1030, 1600 | Methacrylate, Acetate, Hydroxyl (O-H) | 1 |
| LDPE | 3335, 1720, 1737 | Methacrylate, Acetate, Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 3335 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“2), characterized by clear bands with a maximum of about 3335 corresponds to the stretching vibration of the -OH group of carbohydrates, water, and organic acids.”
Identification of sugars and phenolic compounds in honey powders with the use of GC–MS, FTIR spectroscopy, and X-ray diffraction DOI: 10.1038/s41598-020-73306-7 -
Chitosan Vertrauen 1,0
“Similar peaks were also found in chitosan (3361cm-1, 2867cm-1), (3335cm-1, 2895cm-1) (3299cm-1, 2922cm-1 peanut shell and skin powder”
Meng 等 - 2020 - Effects of peanut shell and skin extracts on the a DOI: 10.1016/j.ijbiomac.2020.02.235 -
Acetate Vertrauen 1,0
“In the present study, the cm(cid:1)1 symmetric NH2 CH3 stretching vibration is observed at 3335 in and CH group are not involved in the intermolecular hydrogen”
Growth, structure, Hirshfeld surface and spectroscopic properties of 2-amino-4-hydroxy-6-methylpyrimidinium-2,3-pyrazinedicorboxylate single crystal DOI: 10.1016/j.molstruc.2017.11.019 -
Vertrauen 1,0
“FTIR analysis of the degraded LDPE films gives a close view of N-H cm-1, stretching of aldehyde group at 3334.92 and 3228.84 cm-1, C-C=C symmetric of aromatic ring at 1639.49 C=O cm-1, stretching of aldehyde group at 1735.93 peak at N=O”
Gajendiran 等 - 2016 - Microbial degradation of low-density polyethylene DOI: 10.1007/s13205-016-0394-x -
Hydroxyl (O-H) Vertrauen 1,0
“A peak was observed at 3335 attributed to the hydroxyl (-OH) functional group.”
Experimental Study on the Application of Cellulosic Biopolymer for Enhanced Oil Recovery in Carbonate Cores under Harsh Conditions DOI: 10.3390/polym14214621 -
Silicon nitrogen Vertrauen 1,0
“Peaks observed at 1175, 2200, and 3335 cm-1 refer to with the Si-N stretching mode [25].”
Examination of the Hydrogen Incorporation into Radio Frequency-Sputtered Hydrogenated SiNx Thin Films DOI: 10.3390/coatings11010054 -
Acetate Vertrauen 1,0
“Figure 4b also shows a band at approximately 3335 cm-1, which may be associated with elongation in the HN-C=O group [71], confirming the presence of nitrogen detected in with elongation in the HN-C=O group [71], confirming the presence of n”
Simultaneous Treatment of Both Sides of the Polymer with a Conical-Shaped Atmospheric Pressure Plasma Jet DOI: 10.3390/polym15020461 -
Carboxyl (COOH) Vertrauen 1,0
“The weak but characteristic peaks observed at 1581 (sh), 1541 cm-1 (also stronger in sample D13) are indicative of the antisymmetric carboxylate vibration of metal salts [3335], possibly due to interactions between Pb2+ and Ca2+ (due to lea”
Identification of Colourants and Varnishes in a 14th Century Decorated Wood-Carved Door of the Dionysiou Monastery in Mount Athos DOI: 10.3390/coatings11091087
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.