Was absorbiert bei 1680 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1680 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1680 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 30 | 22 | 1,0 |
| Amide | 29 | 25 | 1,0 |
| Carboxyl (COOH) | 15 | 12 | 1,0 |
| Methacrylate | 14 | 10 | 1,0 |
| Acetate | 14 | 10 | 1,0 |
| Ketone | 13 | 9 | 1,0 |
| Ester | 12 | 9 | 1,0 |
| Alkyl C-H | 7 | 7 | 1,0 |
| N h | 7 | 7 | 1,0 |
| Alkene (C=C) | 5 | 5 | 1,0 |
| Protein beta sheet | 5 | 5 | 1,0 |
| Secondary amine | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 4 | 2 | 1,0 |
| Protein beta turn | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Aromatic ring | 3 | 2 | 1,0 |
| Methoxy (OCH3) | 3 | 2 | 1,0 |
| C-O single bond | 3 | 2 | 1,0 |
| Hydrogen bond | 3 | 2 | 1,0 |
| Ammonium | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Protein | 2 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Protein alpha helix | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| C c single bond | 1 | 0 | 1,0 |
| Nitrate | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1680 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkene (C=C) Vertrauen 1,0
“(cm-1) Component Spectral band Associated vibration C-C/C-O COM 780 single bond stretching C-C/C-O 1318 single bond stretching C-O 1630 double bond stretching C-O COD 1680 double bond stretching”
High precision mapping of kidney stones using mu;IR spectroscopy to determine urinary lithogenesis DOI: 10.1002/jbio.201300201 -
Amide Vertrauen 1,0
“Finally, two major bands, the amide I and II cm-1, 1680-1500 bands observed in are discussed.”
Hirashima 等 - 2005 - ATR-FTIR spectroscopic study on hydrogen bonding o DOI: 10.1021/ma051081s -
Amide Vertrauen 1,0
“aromatic ring and foremost absorption bands at 1692, 1620 and 1600 Both spectrum cm-1 peaks at 1680 and 1550 NNMB and NMB FAXs are related to amide I and II, respectively.”
Biochemical and Structural Characterization of Ferulated Arabinoxylans Extracted from Nixtamalized and Non-Nixtamalized Maize Bran DOI: 10.3390/foods11213374 -
Hydrogen bond Vertrauen 1,0
“amide I band is more sensitive than amide II band concernindicatingthatthecarbonylstretchingvibrationofaminoacid ing the hydrogen bonding-related secondary structure, thus side chains of PGAIPG was exposed markedly in the pH 2.5 1680cm-1 th”
Lin 等 - 2005 - PHand thermal-dependent conformational transitio DOI: 10.1016/j.peptides.2004.11.005 -
Alkyl C-H Vertrauen 1,0
“Drying droplets of mM of intact ketone moieties and the reduced strength of methylglyoxalsolutionsontheATRdiamondcrystalsurface bands in the region we assign to dioxolane structures CdO produced strong absorbance bands in both the (1680 ind”
Loeffler 等 - 2006 - Oligomer formation in evaporating aqueous glyoxal DOI: 10.1021/es060810wCCC -
Amide Vertrauen 1,0
“Note that the subbands of amide I shown as shoulders in the absorption spectrum are seen in the Stark (cid:24)1630 (cid:24)1680 cm-1.”
Park 等 - 2000 - Vibrational Stark spectroscopy of NO bound to heme DOI: 10.1021/ja0014741 -
Alkene (C=C) Vertrauen 1,0
“In contrast cm-1, to the Raman signal, the FT-IR spectrum shows the most intense vibrational mode at 1680 bond.12,13 attributed to the vibrational motion of the alkene group (C=C) and the C=O Although cm-1.”
EXPRESS: Vibrational Spectroscopic Characterization and Coherent Anti-Stokes Raman Spectroscopy (CARS) Imaging of Artepillin C DOI: 10.1177/0003702820904456 -
Bronsted acid site Vertrauen 1,0
“Meanwhile, the peaks at 1467 4+)),20 s(NH while the two peaks at 3161 Brønsted acid sites ((cid:238) cm-1 weaken and remain until 473 K before and 1680 cm-1 and 3246 are attributed to s(NH 3) coordinated to Lewis (cid:238) cm-1 is disappear”
Pena 等 - 2004 - Identification of surface species on titania-suppo DOI: 10.1021/jp0313122
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.