Was absorbiert bei 1570 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1570 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1570 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| N h | 19 | 18 | 1,0 |
| Carboxyl (COOH) | 15 | 10 | 1,0 |
| Amide | 13 | 11 | 1,0 |
| Secondary amine | 9 | 8 | 1,0 |
| Methacrylate | 8 | 7 | 1,0 |
| Acetate | 8 | 7 | 1,0 |
| Alkene (C=C) | 8 | 6 | 1,0 |
| Carbonyl (C=O) | 7 | 6 | 1,0 |
| Aromatic ring | 6 | 4 | 1,0 |
| Ketone | 5 | 4 | 1,0 |
| Ester | 5 | 4 | 1,0 |
| C n single bond | 4 | 4 | 1,0 |
| C=n | 4 | 4 | 1,0 |
| C c single bond | 4 | 4 | 1,0 |
| Alkyl C-H | 4 | 3 | 1,0 |
| Amine primary | 3 | 3 | 1,0 |
| Protein | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| N-O bond | 2 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Quinone | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| cellulose | 1570, 1735, 1650 | Amide | 1 |
| starch | 1570, 1650, 1540 | Amide | 1 |
| HPMC | 1570, 1640, 1550 | Carboxyl (COOH), N h | 1 |
| edible oils | 1570, 1743, 1064 | Carboxyl (COOH) | 1 |
| oil | 1570, 1161, 1163 | Carboxyl (COOH), Amide | 1 |
| graphene | 1570, 1720, 2097 | Amide, Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1570 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonyl (C=O) Vertrauen 1,0
“The cm-1 above mentioned maximum at the wavenumber of 1570 is also due to an absorption of carbonyl moieties, with the substantial shift towards lower energies resulting that the C=O absorption may be connected with a presence of two carbon”
Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications DOI: 10.1016/j.apsusc.2017.03.223 -
Acetate Vertrauen 1,0
“The position of the C=O peak at 1570 cm-1 did not change at different”
Chen 等 - 2020 - Solubility Improvement of Progesterone from Solid DOI: 10.3390/polym12040854 -
C c single bond Vertrauen 1,0
“9, the peak at wave number 1570 between polymer chains, which leads to the decrease in crysC-C C-N (which is responsible for and bending modes of tallinity of M 0.”
Effects of ionic liquid on the hydroxylpropylmethyl cellulose (HPMC) solid polymer electrolyte DOI: 10.1007/s11581-016-1768-0 -
Acetate Vertrauen 1,0
“(OH stretching vibration), 1570 (C=O stretching vibration), 1570 (C=C aromatics), 1180 (C-O vibration) The XRD peaks for palladium has exhibited at 2”
Debataraja 等 - 2018 - Synthesis and Characterization of Nanocomposites o DOI: 10.22146/ijc.26660 -
Carboxyl (COOH) Vertrauen 1,0
“0.0-4.0% methods involve measuring a new peak at 1570 which is 2.5%, 3.0%, 3.5%, and 4.0%) covered the range of FFA 24 C]O interrelated with the group of the carboxylic acid radical content in the samples (expressed as the percentage of ole”
Dong 等 - 2020 - An indirect analytical approach based on ATR-FTIR DOI: 10.1039/d0ra03668d -
Carboxyl (COOH) Vertrauen 1,0
“and subsequently measuring the carboxylate anion band at 1570cm(cid:1)1, was established.”
Determination of the acid values of edible oils via FTIR spectroscopy based on the OH stretching band DOI: 10.1016/j.foodchem.2016.06.035 -
Hydroxyl (O-H) Vertrauen 1,0
“metal-free organic dye combinations (Eosin+N3 and Eosin+N719) rGO shows a broad band at corresponding to the O-H 1570cm-1 stretching mode [46].”
Effect of co-sensitization in solar exfoliated TiO2 functionalized rGO photoanode for dye-sensitized solar cell applications DOI: 10.1016/j.mssp.2019.02.027 -
N h Vertrauen 1,0
“When 5%[AMIM]Cl-PFSA composite membranes was compared conversion rate is 1.5%, decomposition temperature of with PFSA membrane, resulting in a new peak vibration: cm-1 cm-1 triethylamine pretreated and the PFSA film distributed at 3410 is N”
Thermal stability and lifetime of [AMIM]Cl-PFSA composite membranes DOI: 10.1007/s10973-016-6065-7
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.