Was absorbiert bei 1454 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1454 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1454 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 40 | 36 | 1,0 |
| Methacrylate | 10 | 9 | 1,0 |
| Acetate | 10 | 9 | 1,0 |
| Amide | 9 | 8 | 1,0 |
| Methoxy (OCH3) | 8 | 7 | 1,0 |
| Aromatic ring | 6 | 5 | 1,0 |
| Carboxyl (COOH) | 5 | 5 | 1,0 |
| Methyl | 5 | 4 | 1,0 |
| C-O single bond | 4 | 4 | 1,0 |
| Hydrogen bond | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Protein | 3 | 3 | 1,0 |
| Ring structure | 3 | 3 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| C=n | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 1 | 1,0 |
| Lewis acid site | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Triglyceride | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1454 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“cm-1 C-H is assigned to the The peak centered at 1454”
Braun 等 - 2006 - Infrared spectroscopic determination of lactide co DOI: 10.1021/ma061922a -
Acetate Vertrauen 1,0
“Table 3, According to the IR data in W-DHS has characteristic peaks at 1513, 1377, 1194 and cm-1 corresponding to the characteristic peaks of TC-DHS at 1727 (C=O vibration), 1454, 1057 cm-1.”
Discrimination and similarity evaluation of tissue-cultured and wild Dendrobium species using Fourier Transform Infrared Spectroscopy DOI: 10.1016/j.molstruc.2015.01.027 -
Alkyl C-H Vertrauen 1,0
“cm(cid:2)1 spectrum.107-110 observed at 2937 as a broad peak in the cm(cid:2)1 C-H Another sharp peak at 1454 represented the bending of-CH 2-groupsinPAN.105,107,108ThecombinedvibrationofC-H Creative -CH 22021.”
Electrocatalytic and structural properties and computational calculation of PAN-EC-PC-TPAI-I2 gel polymer electrolytes for dye sensitized solar cell application DOI: 10.1039/d1ra01983j -
C c single bond Vertrauen 1,0
“The peaks at 1487 1454cm-1 -COOν and are due to the between and C-C”
Das 等 - 2004 - Kinetics and adsorption behaviour of salicylate on DOI: 10.1016/j.colsurfa.2004.02.010 -
Alkyl C-H Vertrauen 1,0
“[95] found a small peak at 1454 on ATR-FTIR attributed to the bendingshaking of C-H bonds of CH aliphatic sets of triglycerides in almonds.”
Characterizing the Bioactive Ingredients in Sesame Oil Affected by Multiple Roasting Methods DOI: 10.3390/foods11152261 -
Alkyl C-H Vertrauen 1,0
“cm-1 and 2611.01 >3000 (Medium) Alkane (C-H Stretching) 2715.39 2879.43cm-1 and2868.32cm-1 ±2860cm-1 Alkane(C-HStretching) (Medium) 2210.28cm-1 ±2200cm-1 Alkyne(C≡CStretching) (Medium) cm-1 cm-1 2935.05 ±2935 (Medium) Alkane (C-H Stretching”
Validation of the Developed Zero-Order Infrared Spectrophotometry Method for Qualitative and Quantitative Analyses of Tranexamic Acid in Marketed Tablets DOI: 10.3390/molecules26226985 -
Protein Vertrauen 1,0
“1058cm(cid:3)1 is found on the contrary to the protein bands at 1454 [27] F.”
Rapid approach to analyze biochemical variation in rat organs by ATR FTIR spectroscopy DOI: 10.1016/j.saa.2013.09.131 -
Alkyl C-H Vertrauen 1,0
“The peaks at 1454, and of CH scissoring, and 2 COOThe FMNs were stored in an airtight amber bottle to prevent C=O symmetric stretching of the group in amino exposure to light and oxygen.”
Sukprasert 等 - 2020 - Synchrotron FTIR Light Reveals Signal Changes of B DOI: 10.1155/2020/6149713
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.