¿Qué absorbe a 930 cm⁻¹ en un espectro FTIR?
Una banda cerca de 930 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
Una banda cerca de 930 cm⁻¹ se interpreta generalmente verificando qué grupos funcionales coocurren repetidamente allí en la literatura, luego confirmando al menos uno o dos picos adicionales en la misma muestra. Esta página clasifica esas asignaciones por evidencia acumulada en lugar de por una única regla fija de libro de texto.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 13 | 10 | 1,0 |
| Hydroxyl (O-H) | 9 | 9 | 1,0 |
| Alkyl C-H | 8 | 8 | 1,0 |
| C-O single bond | 7 | 6 | 1,0 |
| Silicon (Si) | 6 | 6 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Siloxane (Si-O-Si) | 5 | 5 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Metal oxygen | 4 | 3 | 1,0 |
| Phosphate (PO4) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Ammonium | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Silicon fluorine | 2 | 2 | 1,0 |
| Aldehyde (CHO) | 2 | 2 | 0,9 |
| Silanol (Si-OH) | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 0,9 |
| Oxygen heterocycle | 1 | 0 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una regla fija única. Confirme siempre según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| zinc oxide | 930, 1627, 1638 | Alkyl C-H, C-O single bond | 1 |
| SiO | 930, 800, 1745 | Silicon-oxygen (Si-O), Hydroxyl (O-H), C-O single bond | 1 |
| kaolinite | 930, 3696, 693 | Hydroxyl (O-H), Silicon-oxygen (Si-O) | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
Esta banda adquiere significado solo cuando se lee junto con sus picos vecinos. En la práctica, los analistas primero observan las asignaciones anteriores, luego verifican si la misma muestra también muestra otros picos esperados para el mismo motivo estructural. Una banda solitaria cerca de 930 cm⁻¹ generalmente no es suficiente por sí sola para la identificación del material.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Carbonate confianza 1,0
“S1 S1-12h S1-24h S1-48h S1-72h S1-1 week Remarks 461.1 461.1 461.1 450.9 471.3 420.4, 416.1 Peak intensity changes as hydration time increases 522.2 522.2 527.3 527.3 522.2 532.4 Peak intensity changes as hydration time increases SO42(cid:2”
Theoretical and experimental study of structures and properties of cement paste The nanostructural aspects of C–S–H DOI: 10.1016/j.jpcs.2011.05.001 -
Aromatic ring confianza 1,0
“The intensity gradually and the absorption intensity of the peak at cm(cid:2)1 of the peak at 930 attributed to tri-substituted benzene cm(cid:2)1 decreases along with the increase of temperature 930 ring that is attached with oxazine ring”
Cao 等 - 2008 - Synthesis and thermal properties of the thermosett DOI: 10.1016/j.polymdegradstab.2007.10.002 -
confianza 1,0
“As the additive fluorine concentration increases, the intensity of Si-F peak cm-1 increases and the frequency of the Si-O stretching stretching vibrations located at 930 cm-1 vibration mode centered at 1060 shifts towards higher wavenumber.”
Chabane 等 - 2009 - Characterization of SiOF thin films deposited by P DOI: 10.4028/www.scientific.net/MSF.609.59 -
Hydroxyl (O-H) confianza 1,0
“Citation: Chen,S.;Tan,H.;Zhang, Compared with sapphires from other origins, sapphires from this mine have three characteristic C.;Teng,Y.;Zu,E.Studyon cm-1, cm-1 infrared peaks of kaolinite at 930, 1025, and 1110 of which the single peak at”
Study on Gemological Characteristics of Blue Sapphires from Baw-Mar Mine, Mogok, Myanmar DOI: 10.3390/cryst11111275 -
C c single bond confianza 1,0
“cm-1 in C-OH group and stretching of C-C in the carbohydrate The area below 930 (from 930 cm-1) to about 700 is the vibration area, which is very characteristic for vibrations from the anomeric region”
Identification of sugars and phenolic compounds in honey powders with the use of GC–MS, FTIR spectroscopy, and X-ray diffraction DOI: 10.1038/s41598-020-73306-7 -
Silicon (Si) confianza 1,0
“Figure 3 also tends to strengthen the Si-O bonds and change Si-O-Si shows the Si-F stretching mode peak located at around 930 bonding angles.”
Lee 和 Park - 1996 - Effect of fluorine on dielectric properties of SiO DOI: 10.1063/1.363512 -
Borate confianza 1,0
“(iii) Two successive distinct broad bands with the first extended It is to be mentioned that the clear identification and strong -1 from 780 to 1150 cm and showing two peaks at 930 and appearance of the vibrational bands due to both borate”
Marzouk 等 - 2021 - Judd-Ofelt analysis of spectroscopic measurements DOI: 10.1016/j.molstruc.2021.130925 -
Metal oxygen confianza 1,0
“Ti-O-Si portant feature to be noted here is the presence of the cm-1 ∼930 absorption peak located at [18,20], which is a clear Ti-O-Si indication that the Si, Ti and O atoms were mixed at the atomic (b) clearly shows that the relative inten”
Sarkar 等 - 2007 - Dielectric properties of sol-gel derived high-k ti DOI: 10.1016/j.tsf.2006.11.155
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas de literatura, coincidencias de biblioteca y un análisis respaldado por literatura — en segundos.