Was absorbiert bei 930 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 930 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 930 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 13 | 10 | 1,0 |
| Hydroxyl (O-H) | 9 | 9 | 1,0 |
| Alkyl C-H | 8 | 8 | 1,0 |
| C-O single bond | 7 | 6 | 1,0 |
| Silicon (Si) | 6 | 6 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Siloxane (Si-O-Si) | 5 | 5 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Metal oxygen | 4 | 3 | 1,0 |
| Phosphate (PO4) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Ammonium | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Silicon fluorine | 2 | 2 | 1,0 |
| Aldehyde (CHO) | 2 | 2 | 0,9 |
| Silanol (Si-OH) | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 0,9 |
| Oxygen heterocycle | 1 | 0 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| zinc oxide | 930, 1627, 1638 | Alkyl C-H, C-O single bond | 1 |
| SiO | 930, 800, 1745 | Silicon-oxygen (Si-O), Hydroxyl (O-H), C-O single bond | 1 |
| kaolinite | 930, 3696, 693 | Hydroxyl (O-H), Silicon-oxygen (Si-O) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 930 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonate Vertrauen 1,0
“S1 S1-12h S1-24h S1-48h S1-72h S1-1 week Remarks 461.1 461.1 461.1 450.9 471.3 420.4, 416.1 Peak intensity changes as hydration time increases 522.2 522.2 527.3 527.3 522.2 532.4 Peak intensity changes as hydration time increases SO42(cid:2”
Theoretical and experimental study of structures and properties of cement paste The nanostructural aspects of C–S–H DOI: 10.1016/j.jpcs.2011.05.001 -
Aromatic ring Vertrauen 1,0
“The intensity gradually and the absorption intensity of the peak at cm(cid:2)1 of the peak at 930 attributed to tri-substituted benzene cm(cid:2)1 decreases along with the increase of temperature 930 ring that is attached with oxazine ring”
Cao 等 - 2008 - Synthesis and thermal properties of the thermosett DOI: 10.1016/j.polymdegradstab.2007.10.002 -
Vertrauen 1,0
“As the additive fluorine concentration increases, the intensity of Si-F peak cm-1 increases and the frequency of the Si-O stretching stretching vibrations located at 930 cm-1 vibration mode centered at 1060 shifts towards higher wavenumber.”
Chabane 等 - 2009 - Characterization of SiOF thin films deposited by P DOI: 10.4028/www.scientific.net/MSF.609.59 -
Hydroxyl (O-H) Vertrauen 1,0
“Citation: Chen,S.;Tan,H.;Zhang, Compared with sapphires from other origins, sapphires from this mine have three characteristic C.;Teng,Y.;Zu,E.Studyon cm-1, cm-1 infrared peaks of kaolinite at 930, 1025, and 1110 of which the single peak at”
Study on Gemological Characteristics of Blue Sapphires from Baw-Mar Mine, Mogok, Myanmar DOI: 10.3390/cryst11111275 -
C c single bond Vertrauen 1,0
“cm-1 in C-OH group and stretching of C-C in the carbohydrate The area below 930 (from 930 cm-1) to about 700 is the vibration area, which is very characteristic for vibrations from the anomeric region”
Identification of sugars and phenolic compounds in honey powders with the use of GC–MS, FTIR spectroscopy, and X-ray diffraction DOI: 10.1038/s41598-020-73306-7 -
Silicon (Si) Vertrauen 1,0
“Figure 3 also tends to strengthen the Si-O bonds and change Si-O-Si shows the Si-F stretching mode peak located at around 930 bonding angles.”
Lee 和 Park - 1996 - Effect of fluorine on dielectric properties of SiO DOI: 10.1063/1.363512 -
Borate Vertrauen 1,0
“(iii) Two successive distinct broad bands with the first extended It is to be mentioned that the clear identification and strong -1 from 780 to 1150 cm and showing two peaks at 930 and appearance of the vibrational bands due to both borate”
Marzouk 等 - 2021 - Judd-Ofelt analysis of spectroscopic measurements DOI: 10.1016/j.molstruc.2021.130925 -
Metal oxygen Vertrauen 1,0
“Ti-O-Si portant feature to be noted here is the presence of the cm-1 ∼930 absorption peak located at [18,20], which is a clear Ti-O-Si indication that the Si, Ti and O atoms were mixed at the atomic (b) clearly shows that the relative inten”
Sarkar 等 - 2007 - Dielectric properties of sol-gel derived high-k ti DOI: 10.1016/j.tsf.2006.11.155
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.