Was absorbiert bei 450 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 450 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 450 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 20 | 19 | 1,0 |
| Silicon (Si) | 11 | 11 | 1,0 |
| Silicon-oxygen (Si-O) | 11 | 10 | 1,0 |
| Siloxane (Si-O-Si) | 7 | 6 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Silicon nitrogen | 2 | 2 | 1,0 |
| Carbonate | 2 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Metal oxo | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Metalloid oxygen | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Nitride | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 0,5 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 450 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The cm-1 567cm-1 absorption bands ~ 449.86 and ~ are associated with the stretching vibration of cm-1 Fe-O and FeO octahedral rotation.”
Evolution of structure and improvement in dielectric properties of praseodymium substituted YFeO3 nanomaterials synthesized via a sol-gel auto-combustion method DOI: 10.1016/j.ceramint.2020.11.005 -
Carbohydrate Vertrauen 1,0
“We note that Shrimp ShP is more between 390 and 530 with maximum peak of 450 due to polycrystallinethanallourchitosansamplesbecauseitsbuildslowlywiththe saccharides decomposition.”
A comparison of chitosan properties after extraction from shrimp shells by diluted and concentrated acids DOI: 10.1016/j.heliyon.2020.e03486 -
Vertrauen 1,0
“FT-IR spectra Nanoparticles cm-1 ∼450 depicts a strong band at which corresponds to the bending vibration of Ni-O bond.”
Synthesis of nickel oxide nanoparticles using pulsed laser ablation in liquids and their optical characterization DOI: 10.1016/j.apsusc.2012.03.147 -
Silicon (Si) Vertrauen 1,0
“A weak absorption peak at 450 cm-1 corresponds to the Si-N stretching while a N-H bending peak is also observed at 1180 cm-1 [20].”
Deposition of Silicon Nitride Films using Chemical Vapor deposition for Photovoltaic Applications DOI: 10.1016/j.rinp.2016.11.029 -
Vertrauen 1,0
“FTIR studies reveal the presence of multiple peaks in the 1000-1600 cm-1 cm-1 region due to Na-O, K-O vibrations and at ~450 and 584 due to Fe-O and Co-O bonds.”
Kirana 等 - 2018 - Synthesis and Characterization of Sodium Potassium DOI: 10.1080/0371750X.2018.1465359 -
Silicon (Si) Vertrauen 1,0
“The peaks centred at 450 and 964 are attributed to Si-N stretching due to the silicon nitride.”
Optical and photoelectrochemical properties of nitrogen-doped a-SiC thin films deposited by reactive DOI: 10.1080/2374068X.2021.1890420 -
N-O bond Vertrauen 1,0
“system27 at 406/395 and 369/362 No other isotope-difference peaks in 1, whereas in the corresponding unbridged is at 450 cm-1.”
Pinakoulaki 等 - 2003 - The active site structure of heme a(3)(3+)-C N-Cu- DOI: 10.1021/jp034326g -
Metal oxygen Vertrauen 1,0
“The peak emerging at cm-1 450 is attributed to Y-O vibrational mode [9].”
Synthesis and luminescence properties of europium-codoped and dysorium-doped YVO4 nanophosphor for potential applications DOI: 10.1007/s00339-019-2990-1
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.