Was absorbiert bei 2400 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2400 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2400 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbon dioxide | 4 | 4 | 1,0 |
| Water (H2O) | 3 | 3 | 1,0 |
| N h | 3 | 2 | 1,0 |
| Alkyl C-H | 3 | 2 | 1,0 |
| Nitrile | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Hydrogen bond | 2 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 2400, 1400, 3430 | Alkyl C-H | 2 |
| soil | 2400, 575, 1240 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2400 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Adsorbed carbon monoxide Vertrauen 1,0
“The deformation band of C=O at around and absorption peaks ob2400cm(cid:2)1 served ordinary between 2300 and due to adsorbed CO molecules in air are absent in our”
Mn doped ZnO nanostructured thin films prepared by ultrasonic spray pyrolysis method DOI: 10.1016/j.spmi.2012.06.023 -
Hydroxyl (O-H) Vertrauen 1,0
“As far as the high-frequency region is concerned (i.e., for > 2400 cm-1), the shape of the OH-stretching band shows significant changes with concentration.”
Hydrating Capabilities of the Biopolymers Produced by the Marine Thermophilic Bacillus horneckiae SBP3 as Evaluated by ATR-FTIR Spectroscopy DOI: 10.3390/ma15175988 -
Alkyl C-H Vertrauen 1,0
“No significant difference in peak location was found in the investigated spectral region, except for the narrow cm-1 cm-1(C peaks at approximately 2800 (C-H stretch), 2400 = O stretch) and the region of”
Classification and identification of Rhodobryum roseum Limpr. and its adulterants based on fourier-transform infrared spectroscopy (FTIR) and chemometrics DOI: 10.1371/journal.pone.0172359 -
Carbon dioxide Vertrauen 1,0
“Normalized intensity is the integrated area of ing lost their labile compounds prior to sampling, as was 2200cm-1 the CO2 peak from 2400 to normalized to weight of the the case with the analysed POM having been sampled seven sample.”
Demyan 等 - 2013 - Combining a coupled FTIR-EGA system and in situ DR DOI: 10.5194/bg-10-2897-2013 -
Acetate Vertrauen 1,0
“The deformation the samples are observably composed nanostructures that 1000cm-1, C=O band of at about and absorption peaks look like nanorods or hexagonal prisms with a diameter of 2400cm-1 observed ordinarily between 2300 and due to”
Kharroubi 等 - 2012 - Mn doping effect on the structural properties of Z DOI: 10.1088/0031-8949/86/01/015805 -
Hydrogen bond Vertrauen 1,0
“A hydrogen-bonding stretching band 2400exhibits a broad feature with a number of subpeaks at cm-1.”
Noguchi 等 - 1999 - Structure of a histidine ligand in the photosynthe DOI: 10.1021/bi990631 -
Water (H2O) Vertrauen 1,0
“Unlike archaeal rhodopsins, water bands were not <2400 cm-1 rhodopsin and Batho-minus-Iso spectra by use of such marker region at 77 K for bovine observed in the bands.”
Ota 等 - 2006 - Structural changes in the Schiff base region of sq DOI: 10.1021/bi051937l -
Water (H2O) Vertrauen 1,0
“In the M <2400 cm-1, Figure 5b,c shows that at there are two water intermediate, appearance of a protonation signal of the cm-1) bands for SRII (2307 and 2215 and three water bands counterion is a common feature among rhodopsins (SRIs, cm-1”
Suzuki 等 - 2008 - Structural Changes of Salinibacter Sensory Rhodops DOI: 10.1021/bi801358b
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.