Was absorbiert bei 2360 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2360 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2360 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbon dioxide | 8 | 8 | 1,0 |
| Hydroxyl (O-H) | 8 | 7 | 1,0 |
| N h | 8 | 7 | 1,0 |
| Carboxyl (COOH) | 6 | 6 | 1,0 |
| Alkyl C-H | 6 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Carbonyl (C=O) | 5 | 4 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Ketone | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| C-O single bond | 3 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Thiol | 2 | 1 | 1,0 |
| N c o | 1 | 1 | 1,0 |
| Isocyanate | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| C#c | 1 | 1 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| SiO | 2360, 800, 1745 | Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2360 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Thiol Vertrauen 1,0
“The medium doublet bands around 2360 revealed the typical S-H stretching of L-cysteine amino acid, which suggested the possible”
Mesoporous magnetite nanoparticles synthesis using the Peltophorum pterocarpum pod extract, their antibacterial efficacy against pathogens and ability to remove a pollutant dye DOI: 10.1016/j.molstruc.2018.10.042 -
Acetate Vertrauen 1,0
“cm-1 few absorption peaks around 2360 1483 1359 and 1315 which could CEPTE 32be due to organic/inorganic impurities like C=O, CO and -NO [23].”
Structural and optical investigations of Nd3+doped Y2O3-SiO2 nanopowder DOI: 10.1016/j.jallcom.2017.09.269 -
Carbonyl (C=O) Vertrauen 1,0
“Absorbance peaks at 2360 suggest the ΔT reduction in after addition of SWCNT to UHM(cid:2) presence of an O=C=O asymmetric stretch [37].”
Khan 等 - 2015 - Morphological characteristics of solution spun nan DOI: 10.1134/S0965545X15060115 -
Silicon (Si) Vertrauen 1,0
“and 2360 These peaks can be attributed to the wagging mode of B-H bond, to the stretching mode of Si-B and to the stretching mode B-H bonds respectively [8].”
Seba 等 - 2009 - Correlation between physicochemical and electrical DOI: 10.4028/www.scientific.net/MSF.609.129 -
Water (H2O) Vertrauen 1,0
“A sharp peak at 2360 could be attributed to H(cid:1)(cid:1)O(cid:1)(cid:1)H deformation vibration of group associated with weakly bond water molecules [41].”
Role of iron in the enhanced reactivity of pulverized Red mud: Analysis by Mssbauer spectroscopy and FTIR spectroscopy DOI: 10.1016/j.cscm.2019.e00266 -
Hydroxyl (O-H) Vertrauen 1,0
“3454 and 2 cm-1 cm-1 2360 revealed O-H stretching;”
Vidhya 等 - 2020 - Energy storage performance of CoNiSe2 nanostructur DOI: 10.1016/j.matlet.2020.128485 -
Hydrogen bond Vertrauen 1,0
“The peak shifting from 2360 1090 cm(cid:0) 1 -OH to 2358 is corresponds to hydrogen bond formation between amine groups (betel leaf) and groups (PVA) in composite film.”
Akram 等 - 2023 - Fabrication and characterization of antimicrobial DOI: 10.1016/j.heliyon.2023.e17961 -
Acetate Vertrauen 1,0
“O-H 3266 Carboxylic acid Strong stretching C-H 2939 Alkane Medium stretching O=C--O 2360 Carbon dioxide Strong stretching”
Chowdhury 等 - 2023 - Green synthesis and characterization of zirconium DOI: 10.1016/j.heliyon.2022.e12711
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.