Was absorbiert bei 2350 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2350 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2350 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 10 | 10 | 1,0 |
| Carbon dioxide | 6 | 5 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Carbonyl (C=O) | 4 | 4 | 1,0 |
| Amide | 4 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
| Silicon hydride | 1 | 1 | 1,0 |
| Isocyanate | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 0,8 |
| Alkene (C=C) | 1 | 1 | 0,8 |
| Secondary amine | 1 | 0 | 1,0 |
| C n single bond | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 2350, 1650, 1655 | Alkyl C-H | 1 |
| methylene blue | 2350, 1745, 1739 | Alkyl C-H | 1 |
| chitin | 2350, 1650, 1655 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2350 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“The ∼2880cm-1 ∼1400cm-1 ∼2350 ∼1300 Among these peaks, those at and peaks at and are show reasonable agreement C-H known to correspond to CO with those in the experiment.”
Kurokawa 等 - 2016 - Possible formation of one-dimensional chains of C2 DOI: 10.7567/APEX.9.049201 -
Alkyl C-H Vertrauen 1,0
“The peaks at approximately cm-1 2350 were attributed to symmetric and asymmetric vibrations of C-H groups in the”
Antimicrobial Activity of Chemically and Biologically Treated Chitosan Prepared from Black Soldier Fly (Hermetia illucens) Pupal Shell Waste DOI: 10.3390/microorganisms9122417 -
Vertrauen 1,0
“3 Effect of pH (A) and temperature (B) on the decolorization of MB by strain Acinetobacter pittii cm-1, the MB was reported at 2350 while the absorption corresponding to the H-N-H bending cm-1.Thesepeaks werealsosignificantly reducedin thes”
Biodegradation of Methylene Blue as an Evidence of Synthetic Dyes Mineralization during Textile Effluent Biotreatment by Acinetobacter pittii DOI: 10.1007/s40710-020-00443-6 -
Alkyl C-H Vertrauen 1,0
“The band at 2350 is assigned to 2 aliphatic and aromatic CH band structure [39].”
Influence of Bismuth Doping on Structural, Electrical and Dielectric Properties of Ni-Zn Nanoferrites DOI: 10.1016/j.jallcom.2020.157760 -
Alkyl C-H Vertrauen 1,0
“The absorption at observed around 2350 1.8 700-950cm(cid:2)1 is assigned to the CH out-of-plane bending around sp2”
Bonding structure and optical properties of a-CNx:H films deposited in CH4-NH3 system DOI: 10.1016/j.vacuum.2009.04.055 -
Aromatic ring Vertrauen 1,0
“1506-1510 is because of aromatic The absorcm(cid:1)1 -C(cid:3)Nis attributed to bance peak around 2350 -C(cid:3)C- (Nitrites) and (Alkynes) compounds [16].”
Awad 等 - 2023 - An attempt to apply laser combustion to palm waste DOI: 10.1051/jeos/2023003 -
Carbonyl (C=O) Vertrauen 1,0
“From Figure 9, the asymmetric cm-1 stretching vibrations of carbonyl (C=O) lead to the peak wavenumbers of 2350 and cm-1.”
The Catalytic Effect from Alkaline Elements on the Tar-Rich Coal Pyrolysis DOI: 10.3390/catal12040376 -
Carbon dioxide Vertrauen 1,0
“On the other hand, the bands 2350.40 2325.00 were O-- C-- assigned to O carbon dioxide.”
Preparation and characterization of activated carbon from agricultural wastes and their ability to remove chlorpyrifos from water DOI: 10.1016/j.toxrep.2023.01.011
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.