¿Qué absorbe a 1425 cm⁻¹ en un espectro FTIR?
Una banda cerca de 1425 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
Una banda cerca de 1425 cm⁻¹ se interpreta generalmente verificando qué grupos funcionales coocurren repetidamente allí en la literatura, luego confirmando al menos uno o dos picos adicionales en la misma muestra. Esta página clasifica esas asignaciones por evidencia acumulada en lugar de por una única regla fija de libro de texto.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Alkyl C-H | 26 | 24 | 1,0 |
| Carbohydrate | 10 | 8 | 1,0 |
| Methacrylate | 9 | 9 | 1,0 |
| Acetate | 9 | 9 | 1,0 |
| Methoxy (OCH3) | 8 | 8 | 1,0 |
| Aromatic ring | 7 | 7 | 1,0 |
| Amide | 7 | 7 | 1,0 |
| Carboxyl (COOH) | 6 | 6 | 1,0 |
| C-O single bond | 6 | 6 | 1,0 |
| Ketone | 5 | 5 | 1,0 |
| Lignin | 5 | 4 | 1,0 |
| Hydroxyl (O-H) | 5 | 4 | 1,0 |
| Ester | 4 | 4 | 1,0 |
| Carbonyl (C=O) | 4 | 4 | 1,0 |
| Carbonate | 3 | 3 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Nitrogen heterocycle | 2 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Boron nitrogen | 1 | 1 | 0,9 |
La clasificación refleja la evidencia acumulada de la literatura, no una regla fija única. Confirme siempre según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| lignin | 1425, 1035, 1510 | Alkyl C-H, Methacrylate, Acetate | 2 |
| cellulose | 1425, 1735, 1650 | Alkyl C-H, Acetate, Methacrylate | 1 |
| hemicellulose | 1425, 1730, 897 | Alkyl C-H, Methacrylate, Acetate | 1 |
| nanocellulose | 1425, 1540, 1646 | Alkyl C-H, Methacrylate, Acetate | 1 |
| wood | 1425, 1740, 1730 | Carbohydrate, Alkyl C-H, Methacrylate | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
Esta banda adquiere significado solo cuando se lee junto con sus picos vecinos. En la práctica, los analistas primero observan las asignaciones anteriores, luego verifican si la misma muestra también muestra otros picos esperados para el mismo motivo estructural. Una banda solitaria cerca de 1425 cm⁻¹ generalmente no es suficiente por sí sola para la identificación del material.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Acetate confianza 1,0
“1450and1400cm(cid:2)1(Guilianoetal.,2000).Thescissoringstrongpeakat cm(cid:2)1 was attributed to the cellulose I, while cellulose II and 1430 amorphous cellulose were characterized by weak peak detected at 1420 cm(cid:2)1(Songetal.,2015).On”
Structural characterization of Argania spinosa Moroccan wooden artifacts during natural degradation progress using infrared spectroscopy (ATR-FTIR) and X-Ray diffraction (XRD) DOI: 10.1016/j.heliyon.2019.e02477 -
Acetate confianza 1,0
“1112 C-C, C-O stretching in holocellulose 1425 1426 Aromatic skeletal vibration in lignin and C-H deformation in-plane deforming 1058”
Jin 等 - 2022 - Rapid Identification for the Pterocarpus Bracelet DOI: 10.3390/molecules27154793 -
Alkyl C-H confianza 1,0
“At the same cm1 time, in the region of 1425 related to bending vibrations of -CH 2groups, the signal intensity cm1 decreases, and the intensity of the absorption band at 1315 related to fan-shaped vibrations of - CH 2groups, which are assoc”
Makhliyo 等 - 2023 - Preparation of oxidized nanocellulose by using pot DOI: 10.21203/rs.3.rs-2033622/v1 -
Alkyl C-H confianza 1,0
“Peak at 1425 attributed to vibration of CH group, 2 membrane were estimated using Rabek's method using following”
Fabrication and characterization of modified microcrystalline cellulose membrane as proton exchange membrane for direct methanol fuel cell DOI: 10.1016/j.matpr.2021.01.431 -
Carbohydrate confianza 1,0
“We have calculated the ratios of the cm-1 cm-1 (1505 heights of lignin peaks at 1505/1511 against peaks at 1462 (for beech) and 1511 bands (for pine) cm-1 and 1425 against carbohydrate bands) although high weight losses (due to C-H, deforma”
Pandey 和 Pitman - 2003 - FTIR studies of the changes in wood chemistry foll DOI: 10.1016/S0964-8305(03)00052-0 -
Alkyl C-H confianza 1,0
“More pronounced bands at 1425 (8), 1323 (10), 1105 (14), 1054 (15), and 897 (17) cm-1 which represent stretching vibration of -CH shear, C-H, C-O of secondary alcohol, C-C, and β2 glyosidic linkage in cellulose were clearly discernible, imp”
Solihat 等 - 2020 - Microwave assisted dilute organic acid pre-treatme DOI: 10.1088/1757-899X/935/1/012046 -
Carbonate confianza 1,0
“a sharp peak at 1425 and attributed to carbonates and the decomposition of readily degradable organic matter, such (carbonates: C-O stretch vibration and C-O out of plane vibration, as aliphatic components, polysaccharides, and alcohols.”
Evaluation of the biological stability of waste during landfill stabilization by thermogravimetric analysis and Fourier transform infrared spectroscopy DOI: 10.1016/j.biortech.2011.07.029 -
confianza 1,0
“stretching and aromatic skeletal vibration were important oxygen but is more likely to be an interaction band between 1425cm-1 carbon single bonded oxygen stretch and in-plane carbon , respectively loadings at 1735, 1658, 1328, 1510, and Jo”
Zhou 等 - 2015 - Multivariate Calibration and Model Integrity for W DOI: 10.1155/2015/429846
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas de literatura, coincidencias de biblioteca y un análisis respaldado por literatura — en segundos.