Was absorbiert bei 1340 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1340 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1340 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 12 | 11 | 1,0 |
| Amide | 10 | 10 | 1,0 |
| Secondary amine | 6 | 6 | 1,0 |
| C n single bond | 6 | 6 | 1,0 |
| Protein | 5 | 5 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| C c single bond | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Carbonate | 2 | 2 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Nitro (NO2) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Sulfonate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 0,9 |
| N eq o | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| SiO2 | 1340, 1739, 699 | Alkyl C-H | 1 |
| ZnO | 1340, 1400, 3430 | Alkyl C-H, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1340 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonate Vertrauen 1,0
“COOcm-1) (Figure 6B), an initial section corresponding to (1636 and 1599 is observed, cm-1 cm-1, followed by a peak at 1340 and 1457 indicative of the presence of CO 3, and a cm-1, peak at 1033 corresponding to the presence of PO groups.”
Remineralization Potential of Three Restorative Glass Ionomer Cements: An In Vitro Study DOI: 10.3390/jcm12062434 -
Amide Vertrauen 1,0
“N=O (NO ) symmetric stretching 1340 2 C-N stretching (aryl) 1180 In plane aromatic C-H deformation”
Synthesis and characterization of Heck-cross coupling 4-(4-nitrostyryl) aniline as potential precursor in Schiff-base synthesis DOI: 10.1063/1.5002293 -
Alkyl C-H Vertrauen 1,0
“The sharp peak at 1340 is attributed to the C-H bending in alkanes and the 1097”
Krishnan 等 - 2020 - Leaf Extract ofDillenia indicaas a Source of Selen DOI: 10.3390/coatings10070626 -
N-O bond Vertrauen 1,0
“the TNT NO bands (1340 and 1546 It is clear from the spectra shown that the peaks intensity of these bands 2 decrease when the concentrations decrease.”
Primera-Pedrozo 等 - 2007 - Detection of 2,4,6-trinitrotoluene on non traditio DOI: 10.1117/12.720405 -
Acetate Vertrauen 1,0
“It shows six major diffraction peaks at cm-1 cm-1 and 1406 corresponds to the band at 1340 31.51, 34.33, 35.98, 47.49, 56.29 and 62.59, which C=O bending vibrations and C=O stretching can be assigned to diffraction from (100), (002),”
Saini 等 - 2013 - Structural and Optical Properties of ZnO Nanoparti DOI: 10.1063/1.4810170 -
Acetate Vertrauen 1,0
“But more broadening is noticed in case cm(cid:3)1) due to its high dielectric of C-O-C stretching (1340 of polymer electrolytes containing PC along with the disconstant as compared to DEC.”
Influence of high and low dielectric constant plasticizers on the ion transport properties of PEO: NH4HF2 polymer electrolytes DOI: 10.1177/0954008319894043 -
Sulfonate Vertrauen 1,0
“It may also be observed that a broadened peak around 1340 cm-1 is present is present in the salt samples which can be attributed to the interactions of the sulfonate in the salt samples which can be a(cid:6)ributed to the interactions of th”
Anis 等 - 2023 - Studies on Polybenzimidazole and Methanesulfonate DOI: 10.3390/polym15132821 -
Vertrauen 1,0
“cm-1 cm-1 cm-1 C-H bending), 910 (silane group), 1070 (Si-O-Si asymmetric stretching), 1340 (aromatic Ccm-1 cm-1 cm-1 (CO2+”
Bahramnia 等 - 2022 - The Effect of 3-(Glycidoloxy Propyl) Trimethoxy Si DOI: 10.21203/rs.3.rs-381518/v1
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.