Was absorbiert bei 1334 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1334 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1334 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methacrylate | 6 | 6 | 1,0 |
| Acetate | 6 | 6 | 1,0 |
| Amide | 5 | 5 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Alkyl C-H | 5 | 5 | 1,0 |
| Secondary amine | 4 | 4 | 1,0 |
| C n single bond | 4 | 4 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| S eq o | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 1334, 1650, 1655 | Amide, Acetate, Methacrylate | 1 |
| PVC | 1334, 834, 1195 | Methoxy (OCH3), Methacrylate, Acetate | 1 |
| PVDF | 1334, 1160, 840 | Methacrylate, Amide, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1334 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“A cm-1 peak at 1334 came from -OH bending.”
Electrochemical and Ion Transport Studies of Li+ Ion-Conducting MC-Based Biopolymer Blend Electrolytes DOI: 10.3390/ijms23169152 -
Alkyl C-H Vertrauen 1,0
“Bands of Peak around 1334 cm(cid:0) 1 C-H C-O correspond to the deformation of asymmetric, where there is no lignin was observed [14] and 1241 associated to C-O stretching vibration of guiacyl ring of OPT [15] and removal of hemicellulose.”
Microencapsulation of ginger-based essential oil (Zingiber cassumunar roxb) with chitosan and oil palm trunk waste fiber prepared by spray-drying method DOI: 10.1016/j.csite.2020.100606 -
Alkyl C-H Vertrauen 1,0
“CH deformation and the rocking mode of the C-H bond near Cl are attributed to 2 cm-1 cm-1, cm-1, bands at 1334 and 1245 respectively.”
Ramadan 和 Ismail - 2022 - Tunning the Physical Properties of PVDFPVCZinc F DOI: 10.21203/rs.3.rs-935328/v1 -
Vertrauen 1,0
“Characteristic peak of valdecoxib”
Thakral 等 - 2010 - Eudragit S-100 entrapped chitosan microspheres of DOI: 10.1007/s10856-010-4109-2 -
Carboxyl (COOH) Vertrauen 1,0
“The new peaks cm-1 appeared at 1334, 1572.7 and 3345 after surface modification of CNTs and are related to COOH, O-H and C=O bonds, respectively, for the attachment of carboxyl, alcohol and carbonyl functional groups onto the CNTs surface [”
Preparation and Characterization of Polymer Membranes Impregnated with Carbon Nanotubes for Olive Mill Wastewater DOI: 10.3390/polym14030457 -
Acetate Vertrauen 1,0
“Other peaks at 1334, 1402, and 1054 peak are assigned to the C-O, C-N, and C-O-C stretching, respectively (Ahamad et al., 2020a;”
Ahamad - 2022 - CoSe2@N-Doped Graphene Nanocomposite High-Efficien DOI: 10.21203/rs.3.rs-1197256/v1 -
S eq o Vertrauen 1,0
“In the spectra of complexes (II) and (III), the unbound sulfonyl group was described by two νas(SO2) bands, which were located at 1356 cm-1 and 1336 cm-1 for (II), and at 1347 cm-1 and 1334 cm-1 for (III).”
Study of Lithium-Extraction Systems Based on Benzo-15-Crown-5 Ether and Alkylimidazolium-BasedIonic Liquid DOI: 10.3390/molecules28030935 -
Silicate Vertrauen 1,0
“This band and band at 1334 can vibration of calcium carbonate obtained on the surface of be also assigned to the splitting of ν 3 the silicate particles, influenced by adsorption of CO from atmosphere during the synthesis”
Colovic 等 - 2013 - Creating of Highly Active Calcium-Silicate Phases DOI: 10.2298/SOS1303341C
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.