Was absorbiert bei 1280 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1280 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1280 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 18 | 16 | 1,0 |
| Methacrylate | 16 | 14 | 1,0 |
| Acetate | 16 | 14 | 1,0 |
| Methoxy (OCH3) | 15 | 13 | 1,0 |
| Alkyl C-H | 7 | 7 | 1,0 |
| Hydroxyl (O-H) | 7 | 7 | 1,0 |
| Amide | 6 | 6 | 1,0 |
| Carbonyl (C=O) | 4 | 4 | 1,0 |
| C c single bond | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 3 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Protein | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| Anhydride | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 0,9 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| silica | 1280, 1100, 1080 | Methacrylate, Acetate | 1 |
| PHB | 1280, 3440, 1724 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| PEG | 1280, 1650, 1342 | Methacrylate, Acetate, C-O single bond | 1 |
| polypropylene | 1280, 1030, 1600 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1280 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“Figure 6b shows the peak heights of the CH rocking bands at about 1280”
Hauswirth 等 - 2022 - Spectroscopic Investigation of the Impact of Cold DOI: 10.3390/foods11182786 -
Anhydride Vertrauen 1,0
“of the first peak decreases greatly from 179.0 to 880cm(cid:3)1) peaks (1280, 1080, and are attributed to phosphoric Theresiduesafter theconecalorimeter testwereexaminedfor species.[21] (--O)-O-P) anhydride (P changes in char appearance by”
Synergistic effects of ferric pyrophosphate (FePP) in intumescent flameretardant polypropylene DOI: 10.1002/pat.1590 -
C-O single bond Vertrauen 1,0
“The band at 1305 is associated with the carbonyl group of the ketone linkage in the cm-1 PEEK repeat unit, while the band at 1280 is observed due to the resonance of the cm-1 cm-1 diphenyl ether group [31].”
Vibrational spectroscopic study of pure and silica-doped sulfonated poly(ether ether ketone) membranes DOI: 10.1016/j.saa.2014.12.004 -
Acetate Vertrauen 1,0
“1280 The possible absorption due to C-O vibrations from carbonyl components of the bio”
Optimization of primary sewage sludge and coal lignite by microwave assisted pyrolysis for the production of bio oil DOI: 10.1080/09593330.2020.1797903 -
Amide Vertrauen 1,0
“Amide III (appearing at band 1280 with an intensity of 0.053 for the new vegetable-tanned leather, but which disappeared for the historical binding) was associated with N-H in-plane bending and CH wagging vibration of glycine 2”
Fungal Biodeterioration of a Historical Manuscript Dating Back to the 14th Century: An Insight into Various Fungal Strains and Their Enzymatic Activities DOI: 10.3390/life12111821 -
Carbonyl (C=O) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Production kinetics of polyhydroxyalkanoates by using Pseudomonas aeruginosa gamma ray mutant strain EBN-8 cultured on soybean oil DOI: 10.1007/s13205-016-0452-4 -
C c single bond Vertrauen 1,0
“The bands at cm-1 C-C 1280 and 1232 correspond to the stretching Table 2 summarizes the contact angles of sessile drops of cm-1 films.”
Effect of PEG grafting density on surface properties of polyurethane substrata and the viability of osteoblast and fibroblast cells DOI: 10.1007/s10856-022-06668-1 -
Acetate Vertrauen 1,0
“A weak band of the region 1280 is related to stretching vibrations of C-O and cm-1 wagging of OH.”
HPTLC and FTIR Fingerprinting of Olive Leaves Extracts and ATR-FTIR Characterisation of Major Flavonoids and Polyphenolics DOI: 10.3390/molecules26226892
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.