Was absorbiert bei 960 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 960 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 960 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Phosphate (PO4) | 24 | 23 | 1,0 |
| Silicon-oxygen (Si-O) | 16 | 13 | 1,0 |
| Silanol (Si-OH) | 14 | 13 | 1,0 |
| Silicon (Si) | 13 | 10 | 1,0 |
| Hydroxyl (O-H) | 11 | 10 | 1,0 |
| Alkyl C-H | 8 | 8 | 1,0 |
| Siloxane (Si-O-Si) | 5 | 5 | 1,0 |
| Phosphorus | 5 | 5 | 1,0 |
| Metal oxygen | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| C-S single bond | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Borate | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Quaternary ammonium | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Styrene | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Silicon carbon | 1 | 1 | 1,0 |
| Thiocarbonyl | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 960 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Phosphate (PO4) Vertrauen 1,0
“cm-1 Additional peaks were found in both models at 1,062, 1,053, 1,047, 1,040, and 1,029 b cm-1) cm-1 m The peak width range was restricted to the width of the sample's phosphate peak (at 960 ± 2 1 c Chi-squared is the weighted difference b”
Awonusi 等 - 2007 - Carbonate assignment and calibration in the raman DOI: 10.1007/s00223-007-9034-0 -
Phosphate (PO4) Vertrauen 1,0
“5 highlights that the first two IR bands, assigned to the cm-1 cm-1, Mo-O-Mo vibrational modes, are up-shifted from 792 and 870 to 800 and 887 while the last two IR cm-1 Mo=O bands attributed to the and P-O vibrational modes are down-shifte”
Baibarac 等 - 2019 - Adsorption of 1,4-phenylene diisothiocyanate onto DOI: 10.1038/s41598-019-48314-x -
Amide Vertrauen 1,0
“C-C p coupling of ligands to specific platelets receptors, leading of < 0.05) are related to stretching vibrations in cm-1) intra-cellular extra-cellular signaling,[43] and the amide I band it is to and carbon chains of lipids (960 cm-1).”
Analysis of platelets in hypertensive and normotensive individuals using Raman and Fourier transform infrared‐attenuated total reflectance spectroscopies DOI: 10.1002/jrs.5540 -
C-S single bond Vertrauen 1,0
“This in situ method is performed by the direct and stoim The presence of (C---S) absorption bands located at 960-”
Haezam 等 - 2021 - Synthesis and cytotoxic activity of organotin(IV) DOI: 10.1016/j.sjbs.2021.02.060 -
Phosphate (PO4) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Jaber 和 Kovacs - 2019 - Preparation and synthesis of hydroxyapatite bio-ce DOI: 10.14382/epitoanyag-jsbcm.2019.18 -
Metal oxygen Vertrauen 1,0
“For the TiO loaded SBA-15 photocatalysts, the IR 2 cm-1 ∼960 absorption at is commonly accepted as the characteristic vibration of the Ti-O-Si bond.”
Synthesis of TiO<sub>2</sub> Supported on SBA-15 Using Chelating Method and Their Photocatalytic Decomposition of Methylene Blue DOI: 10.1166/jnn.2011.3207 -
Acetate Vertrauen 1,0
“Negative, Artefact ≅920+1037 1970 SiO2 combination band or 970+1000 [60] C=O stretching shoulder Negative, Artefact ≅960+1000 combination band C=O stretching”
FTIR photoacoustic spectroscopy for identification and assessment of soil components_ Chernozems and their size fractions DOI: 10.1016/j.pacs.2020.100162 -
Silicon (Si) Vertrauen 1,0
“cm¡1 A frequency at about 960 was to a vibration at 960 reported as well in HCl-treated palygorskite and assigned to a Si-OH vibration (12).”
Modification of Chrysotile Surface by Organosilanes: An IR–Photoacoustic Spectroscopy Study DOI: 10.1006/jcis.2001.7524
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.