What absorbs at 906 cm⁻¹ in an FTIR spectrum?
A band near 906 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 906 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Oxygen heterocycle | 5 | 4 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Silicon hydride | 2 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| silica | 906, 1100, 1080 | Alkyl C-H, Methacrylate | 1 |
| polystyrene | 906, 1020, 1600 | Alkyl C-H, Methacrylate, Methoxy (OCH3) | 1 |
| polymer | 906, 1718, 1722 | Alkyl C-H, Methacrylate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 906 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Phosphate (PO4) Vertrauen 1,0
“The bright section is a blank area which and by HPO bands at 906 and 852 resulted from the incision of the ultramicrotome.”
Li 等 - 2014 - Mineralogical characterization of calcification in DOI: 10.1180/minmag.2014.078.4.01 -
Alkyl C-H Vertrauen 1,0
“In asym(C-H) sym(C-H) cm-1 are assigned to the and of (cid:228) (cid:228) C-N+ part a, the intensity of the stretching modes at 906 and 3-N+ moiety, respectively.”
Nikoobakht 和 El-Sayed - 2001 - Evidence for bilayer assembly of cationic surfacta DOI: 10.1021/la010530o -
Acetate Vertrauen 1,0
“OH bending motion is demonstrated by the band at 1322 cm-1 cm-1 Furthermore, the band at 1014 was attributed to the C-O stretching, whereas the band at 906”
Structural and UV-blocking properties of carboxymethyl cellulose sodium/CuO nanocomposite films DOI: 10.1038/s41598-023-28032-1 -
Oxygen heterocycle Vertrauen 1,0
“The other bands seen at 906 and 846 ambient temperature to give the initiator-immobilized NCG were due to asymmetric stretching of the epoxy groups.”
Surface-initiated atom transfer radical polymerization grafting from nanoporous cellulose gels to create hydrophobic nanocomposites DOI: 10.1039/c8ra04163f -
Silicon (Si) Vertrauen 1,0
“56 cm-1 absorption band at 906 is observed which could be attributed to an increase of the 57 cm-1 number of Si-H groups.”
Effects of 400 keV electrons flux on two space grade silicone rubbers DOI: 10.1016/j.matchemphys.2013.05.002 -
Aromatic ring Vertrauen 1,0
“The peak at 906 was attributed to the out-of-plane bending mode of the hydrogen atoms in the phenyl ring of polystyrene.”
Fabrication of Europium-Doped Barium Titanate/Polystyrene Polymer Nanocomposites Using Ultrasonication-Assisted Method: Structural and Optical Properties DOI: 10.3390/polym14214664 -
Oxygen heterocycle Vertrauen 1,0
“The bands at 906 and 837 were attributed to β-CD the stretching vibration of the epoxide in the linker.”
Evaluation of Polyethylene Glycol Crosslinked -CD Polymers for the Removal of Methylene Blue DOI: 10.3390/app10134679 -
N h Vertrauen 1,0
“The 1480 cm-1 3 (symmetric NH bend), the 906 cm-1 (NH 3+/CH rock) and the 3081 cm-1 (N-H stretch) 3+ 3”
Characterization of a New Low Temperature Encapsulation Method with Ethylene-Vinyl Acetate under UV Irradiation for Perovskite Solar Cells DOI: 10.3390/app12105228
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.