What absorbs at 535 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 535 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Quick answer
A band near 535 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Metal oxygen | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Metal oxo | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 0 | 1,0 |
| Protein | 1 | 0 | 1,0 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| NiO | 535, 1006, 1450 | Metal oxygen, C-O single bond, Methoxy (OCH3) | 1 |
| nanotubes | 535, 1735, 1630 | Methacrylate, Methoxy (OCH3) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 535 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
Silicon (Si) confianza 1,0
“cm(cid:3)1 cm(cid:3)1 Al with the presence of two peaks at 535 and 462 assigned to 0.66(cid:1)0.05 8.24(cid:1)0.22 1.69(cid:1)0.07 disulfides Si iodo and brominated compounds and group, respectively this 0.49(cid:1)0.04”
El-Sayed 和 Ismail - 2022 - Physico-chemodiversity variation between the most DOI: 10.1016/j.heliyon.2022.e12457 -
Metal oxygen confianza 1,0
“The two peaks at 535 and 567 attributed to the opposing excursion of the external apical oxygen atoms of TiO octahedral.”
Fabrication of the flexible nanogenerator from BTO nanopowders on graphene coated PMMA substrates by sol-gel method DOI: 10.1016/j.matchemphys.2017.02.002 -
Metal oxygen confianza 1,0
“Fe-O This further characteristic IR bands of at ~ 535 and ~ 450 conforms the presence of iron oxide [21].”
Antibacterial and antiproliferation activity of green synthesized nanoparticles from rhizome extract of Alpinia galangal (L.) Wild DOI: 10.1016/j.inoche.2021.108854 -
Acetate confianza 1,0
“(ii) an AZA XPS O1s spectrum, which shows an intense band at 532 eV accompanied by a band of low intensity at 535 eV, associated with shows an intense band at 532 eV accompanied by a band of low intensity at 535 eV, associintense band at 53”
Photodegradation of Azathioprine in the Presence of Sodium Thiosulfate DOI: 10.3390/ijms23073975 -
Silicon (Si) confianza 1,0
“cm-1 The PAO "NLMK" sample also exhibited a triplet in the 540-500 region with cm-1, absorption maxima at 535, 514, and 504 corresponding to the strain vibrations of Si-O-Al and Si-O (SiO 4) [27,28,30].”
Identification of the Elemental Composition of Granulated Blast Furnace Slag by FTIR-Spectroscopy and Chemometrics DOI: 10.3390/pr10112166 -
Metal oxygen confianza 1,0
“The spectrum of pristine NVO contains a few pronounced bands associated with cm-1 cm-1) the vibrations of V-O bonds: symmetric and asymmetric stretching of V-O-V (535 and 740 and cm-1)30.”
New light on the photocatalytic performance of NH4V4O10 and its composite with rGO DOI: 10.1038/s41598-023-31130-9 -
confianza 1,0
“Accounting for the quantification of the chemical states in C1s (Table 2) overestimating the overall oxygen content, the oxidation should be connected to the generation of more carbons bonding to oxygen, such as C-O-C or (C=O)-C-O*-C bonds,”
Electrospinning of Ethylene Vinyl Acetate/Carbon Nanotube Nanocomposite Fibers DOI: 10.3390/polym11030550 -
confianza 1,0
“The peak position at 529.3 was the spectrum has five deconvoluted peaks at 535.0 (O1), 532.6 (O2), 531.4 (O3), 530.4 (O4), and 529.3 Ni-O-Ni/C-O-Ni attributed to the oxygen in NiO, and 530.4 corresponds to the formation of through eV(O5).”
Phytogenic Generation of NiO Nanoparticles Using Stevia Leaf Extract and Evaluation of Their In-Vitro Antioxidant and Antimicrobial Properties DOI: 10.3390/biom10010089
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.