What absorbs at 528 cm⁻¹ in an FTIR spectrum?
A band near 528 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Quick answer
A band near 528 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mogelijke functionele-groeptoewijzingen
| Functionele groep | Ondersteunende feiten | Geciteerde bronnen | Hoogste vertrouwen |
|---|---|---|---|
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
Ranglijst weerspiegelt cumulatief literatuurbewijs, niet één gezaghebbende regel. Bevestig altijd aan de hand van uw monsterecontext.
Possible materials
| Materiaal | Ondersteunende pieken | Overlapping groups | Geciteerde bronnen |
|---|---|---|---|
| Fe3O4 | 528, 2358, 1673 | Metal oxygen, Methacrylate, Acetate | 1 |
| iron oxide nanoparticles | 528, 2972, 1628 | Metal oxygen, Methacrylate, Acetate | 1 |
| Co3O4 | 528, 1050, 450 | Metal oxygen, Carboxyl (COOH) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 528 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatuur achter deze toewijzingen
-
Metal oxygen vertrouwen 1,0
“Moreover, the two total follows: intensity of O 1s peak at 528.3 eV for MnFe 2O sample is decreased 4 due to the increase in covalently bonded metal oxygen atoms;”
Attestation in self-propagating combustion approach of spinel AFe2O4 (A=Co, Mg and Mn) complexes bearing mixed oxidation states: Magnetostructural properties DOI: 10.1016/j.apsusc.2016.04.177 -
N h vertrouwen 1,0
“The 528 band is assigned to the strong coupling of the oxide cm-1 lattice in hydrated WO 3•nH 2O material [18].”
Martinez-Juarez 和 Diaz-Reyes - 2008 - A method for deposition of tungsten trioxide (WO3) DOI: 10.1117/12.815958 -
Hydroxyl (O-H) vertrouwen 1,0
“874.1 P-O-P asymmetric stretching bond 792.0 P-O-P asymmetric stretching bond 577.1 (H-O-) P=O bond (strong absorption) acid phosphates 527.7 (H-O-) P=O bond (strong absorption) acid phosphates Table 2 FT-Raman wavenumbers and vibrations as”
Growth and characterization of calcium hydrogen phosphate dihydrate crystals from single diffusion gel technique DOI: 10.1002/crat.200900700 -
Acetate vertrouwen 1,0
“The peaks at ~528.2 eV (observed only in DLC film) and at ~535.8 eV (labeled as a vertical bar) are related to the C=O k* bands, which were argued to indicate the presence of carbon oxide contaminants of carbonyl groups [22].”
Ray 等 - 2005 - Electronic structure and hardening mechanism of Si DOI: 10.1016/j.tsf.2004.11.152 -
Alkene (C=C) vertrouwen 1,0
“The large peak from the NO stretching 1,350cm-1, vibration was observed at and the peak from the C=C stretching mode of the nitrate-bound form of the 1,528cm-1.”
Furutani 等 - 2013 - Development of a rapid Buffer-exchange system for DOI: 10.2142/biophysics.9.123 -
vertrouwen 1,0
“http://pubs.acs.org/journal/acsodf Article cm-1 Ni-O fingerprint indicates bonds in the region for the sample.40,41 NiO nanosheet The absorption bands at 527.7 and”
Gawai 等 - 2022 - Microwave-Assisted Coprecipitation Synthesis and L DOI: 10.1021/acsomega.1c06179 -
Alkyl C-H vertrouwen 1,0
“ous solution and stabilized by a capping agent like proteins secreted by The overall result of FTIR spectra indicated that different organic groups OH, C-H, C=O, C=C and C-O were present which act as a capping agent in iron oxide nanopartic”
Biosynthesized Iron Oxide Nanoparticles (Fe3O4 NPs) Mitigate Arsenic Toxicity in Rice Seedlings DOI: 10.3390/toxics9010002 -
vertrouwen 0,9
“Text lists band at 528 as one of the five bands from sputtering, attributed to Co3O4.”
Cobalt Oxide Catalysts in the Form of Thin Films Prepared by Magnetron Sputtering on Stainless-Steel Meshes: Performance in Ethanol Oxidation DOI: 10.3390/catal9100806
Heeft u een spectrum met deze band?
Upload uw FTIR-spectrum en ontvang binnen enkele seconden een volledig interpretatierapport — piektoewijzingen met literatuurverwijzingen, bibliotheekovereenkomsten en een met vertrouwen beoordeelde bewijsketen.