Was absorbiert bei 528 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 528 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 528 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Fe3O4 | 528, 2358, 1673 | Metal oxygen, Methacrylate, Acetate | 1 |
| iron oxide nanoparticles | 528, 2972, 1628 | Metal oxygen, Methacrylate, Acetate | 1 |
| Co3O4 | 528, 1050, 450 | Metal oxygen, Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 528 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“Moreover, the two total follows: intensity of O 1s peak at 528.3 eV for MnFe 2O sample is decreased 4 due to the increase in covalently bonded metal oxygen atoms;”
Attestation in self-propagating combustion approach of spinel AFe2O4 (A=Co, Mg and Mn) complexes bearing mixed oxidation states: Magnetostructural properties DOI: 10.1016/j.apsusc.2016.04.177 -
N h Vertrauen 1,0
“The 528 band is assigned to the strong coupling of the oxide cm-1 lattice in hydrated WO 3•nH 2O material [18].”
Martinez-Juarez 和 Diaz-Reyes - 2008 - A method for deposition of tungsten trioxide (WO3) DOI: 10.1117/12.815958 -
Hydroxyl (O-H) Vertrauen 1,0
“874.1 P-O-P asymmetric stretching bond 792.0 P-O-P asymmetric stretching bond 577.1 (H-O-) P=O bond (strong absorption) acid phosphates 527.7 (H-O-) P=O bond (strong absorption) acid phosphates Table 2 FT-Raman wavenumbers and vibrations as”
Growth and characterization of calcium hydrogen phosphate dihydrate crystals from single diffusion gel technique DOI: 10.1002/crat.200900700 -
Acetate Vertrauen 1,0
“The peaks at ~528.2 eV (observed only in DLC film) and at ~535.8 eV (labeled as a vertical bar) are related to the C=O k* bands, which were argued to indicate the presence of carbon oxide contaminants of carbonyl groups [22].”
Ray 等 - 2005 - Electronic structure and hardening mechanism of Si DOI: 10.1016/j.tsf.2004.11.152 -
Alkene (C=C) Vertrauen 1,0
“The large peak from the NO stretching 1,350cm-1, vibration was observed at and the peak from the C=C stretching mode of the nitrate-bound form of the 1,528cm-1.”
Furutani 等 - 2013 - Development of a rapid Buffer-exchange system for DOI: 10.2142/biophysics.9.123 -
Vertrauen 1,0
“http://pubs.acs.org/journal/acsodf Article cm-1 Ni-O fingerprint indicates bonds in the region for the sample.40,41 NiO nanosheet The absorption bands at 527.7 and”
Gawai 等 - 2022 - Microwave-Assisted Coprecipitation Synthesis and L DOI: 10.1021/acsomega.1c06179 -
Alkyl C-H Vertrauen 1,0
“ous solution and stabilized by a capping agent like proteins secreted by The overall result of FTIR spectra indicated that different organic groups OH, C-H, C=O, C=C and C-O were present which act as a capping agent in iron oxide nanopartic”
Biosynthesized Iron Oxide Nanoparticles (Fe3O4 NPs) Mitigate Arsenic Toxicity in Rice Seedlings DOI: 10.3390/toxics9010002 -
Vertrauen 0,9
“Text lists band at 528 as one of the five bands from sputtering, attributed to Co3O4.”
Cobalt Oxide Catalysts in the Form of Thin Films Prepared by Magnetron Sputtering on Stainless-Steel Meshes: Performance in Ethanol Oxidation DOI: 10.3390/catal9100806
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.