Was absorbiert bei 3100 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 3100 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 3100 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 36 | 29 | 1,0 |
| Alkyl C-H | 27 | 26 | 1,0 |
| Amide | 8 | 8 | 1,0 |
| N h | 8 | 7 | 1,0 |
| Aromatic ring | 6 | 5 | 1,0 |
| Water (H2O) | 5 | 5 | 1,0 |
| Hydrogen bond | 5 | 5 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Alkene (C=C) | 3 | 3 | 1,0 |
| Carbohydrate | 3 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Urea | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Sulfur heterocycle | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Protein | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 3100, 1030, 1600 | Alkyl C-H, Hydroxyl (O-H), Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 3100 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“cm-1 area-1 µmol-bond is hydroxyl group absorption between 3100 and 3400 for n-propyl 3,4,5a slope of 0.092 anarrowabsorptionpeakat3500cm-1,whichhasnotbeen ) trihydroxybenzoate (with correlation coefficient, R 0.97) and0.154µmol-bondarea-1f”
Bahadur 等 - 2010 - Phenol Groups in Northeastern US Submicrometer Aer DOI: 10.1021/es9032277 -
Alkyl C-H Vertrauen 1,0
“They found stretching bands corresponding to the -C-H and = C-H functional groups at 2964.37 and 3100.08 cm-1.”
The Effect of High-Intensity Ultrasound and Natural Oils on the Extraction and Antioxidant Activity of Lycopene from Tomato (Solanum lycopersicum) Waste DOI: 10.3390/antiox11071404 -
Alkyl C-H Vertrauen 1,0
“(cid:2870)(cid:2868) (cid:2870)(cid:2868) 3100cm-1 3100cm-1 (cid:2925)(cid:2931)(cid:2930)(cid:11)(cid:2925)(cid:2931)(cid:2930) is detected for the C-H stretch mode, however for there is extra peak at and (cid:6) (cid:2870)(cid:2868)(cid:1”
EL-Barbary - 2016 - Hydrogenated Fullerenes in Space FT-IR Spectra an DOI: 10.1063/1.4953126 -
N h Vertrauen 1,0
“The raw material of GBP existed as a large rod shaped crystal, but the evaporated GBP-L was found to be a thin plateshapedcrystalsimilartootherreport[20].SinceGBPdisplays a zwitterion in the solid state [13,21], thus there was no IR peak (3”
Hsu 和 Lin - 2009 - Rapid examination of the kinetic process of intram DOI: 10.1016/j.tca.2008.12.008 -
Ring structure Vertrauen 1,0
“The cell was put under potentiostatic correspond to in-plane and ring stretching modes, respec- (cid:1)Hokuto by employing a potentiostat HZ-5000 HAG 3100 cm-1 tively.”
Kato 等 - 2007 - X-ray photoemission spectroscopy and Fourier trans DOI: 10.1116/1.2731347 -
Carbonyl (C=O) Vertrauen 1,0
“degree of MAH was confirmed by the existence of carbonyl group (C=O) stretching peak at 3100 Thermal properties of MAH-g-PP and PP/MAH-g-PP/pulp composites were investigated by DSC and TGA.”
Lee 等 - 2014 - Effect of Maleic Ahydride Grafted PP on the Physic DOI: 10.7317/pk.2014.38.5.566 -
Aromatic ring Vertrauen 1,0
“The aromatic C-H absorption band at 3100in the absorption peak from several functional groups cm-1 cm-1 3050 and aliphatic C-H at 3000-2850 originated ligands, as shown in Figure 1.”
Lestari 等 - 2022 - Zirconium(IV)-BTC-Based MOF Modified with Nickel a DOI: 10.17576/jsm-2022-5109-16 -
Hydroxyl (O-H) Vertrauen 1,0
“Text: 'medium hydroxyl (OH) band in the region 3600-3100 cm-1.'”
Mathews 和 Singh - 2016 - Characterization of solid bitumen from Panandhro l DOI: 10.18520/cs/v111/i11/1842-1846
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.