Was absorbiert bei 2933 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2933 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2933 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 29 | 28 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Hydrogen bond | 2 | 2 | 1,0 |
| Methyl | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Ring structure | 2 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| pectin | 2933, 1746, 1150 | Methacrylate, Acetate, Alkyl C-H | 1 |
| lignin | 2933, 1035, 1510 | Alkyl C-H, Methacrylate, Acetate | 1 |
| gold nanoparticles | 2933, 1638, 3252 | Alkyl C-H, Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2933 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“(C=C bending and stretching mode), 1535 stretching A known amount of furan was injected into a conical mode), 1590, 1607, 1635 (vibrational mode of furan flaskcontaininga weighedquantity of MMTandfitted (C=O monomer), 1750 stretching mode),”
Preparation and evaluation of nanocomposites of polyfuran with Al2O3 and montmorillonite clay DOI: 10.1002/pi.1562 -
Alkyl C-H Vertrauen 1,0
“cm-1 ∼2933 The peak observed at can be attributed to the CH 2 values of R and J in the cathodic compartment (Table 2) The”
Cristian 等 - 2015 - Removal of zinc ions from model wastewater system DOI: 10.1016/j.jwpe.2015.08.001 -
Alkyl C-H Vertrauen 1,0
“The bands observed at 2933 and 2863 are respectively related to the C-H vibrationsandtheC-Hstretchinginmethoxygroups.Thebandat1708cm(cid:2)1isassignedto unconjugated C¼O stretching.”
Synthesis and characterization of lignin–melamine–formaldehyde resin DOI: 10.1177/0892705716632856 -
Alkyl C-H Vertrauen 1,0
“So the higher surface cm-1, a strong C-H peak at 2933 peak around 3350 area of MMA grafted lignin is due to the combined”
Jacob 等 - 2013 - Green Synthesis for Lignin Plasticization Aqueous DOI: 10.7569/JRM.2012.634107 -
Alkyl C-H Vertrauen 1,0
“FUNCTIONAL GROUPS cm-1 10 10 3364.31 NH strectching aliphatic amine NH strectching aliphatic amine cm-1 2933 CH stretching alkane”
Leemarose 等 - 2021 - Sustainable Synthesis of Gold Nanoparticles and it DOI: 10.13005/ojc/370216 -
Alkyl C-H Vertrauen 1,0
“Differential scanning calorimetry (DSC) cm-1 2933 were credited to stretching of C-H bonds, these involved the CH, CH and CH stretching and bending vibraThermal stability of YAP incorporated pectin films was deter2 3 tions (Lorevice et al.,”
Nisar 等 - 2019 - Citrus pectin films enriched with thinned young ap DOI: 10.1080/19476337.2019.1640798 -
Hydroxyl (O-H) Vertrauen 1,0
“The FT-IR analysis of the extract revealed 2932.96cm-1 different characteristic absorption peak values for various functional groups: (-OH stretch), (C-H 1588.91cm-1 (C (cid:30)N stretch), among others.”
Rotich 等 - 2022 - FT-IR Analysis of Beta vulgaris Peels and Pomace D DOI: 10.1155/2022/2233414 -
Alkyl C-H Vertrauen 1,0
“cm-1 The band at 2933 donates the C-H asymmetric stretching of alkanes [72].”
Biosynthesis of Novel Tellurium Nanorods by Gayadomonas sp. TNPM15 Isolated from Mangrove Sediments and Assessment of Their Impact on Spore Germination and Ultrastructure of Phytopathogenic Fungi DOI: 10.3390/microorganisms11030558
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.