Was absorbiert bei 2927 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2927 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2927 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 81 | 75 | 1,0 |
| Hydroxyl (O-H) | 16 | 15 | 1,0 |
| Amide | 6 | 6 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Carboxyl (COOH) | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Methyl | 4 | 4 | 1,0 |
| Ketone | 4 | 4 | 1,0 |
| Ester | 4 | 4 | 1,0 |
| Carbonyl (C=O) | 4 | 4 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Water (H2O) | 3 | 3 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| Fatty acid | 2 | 2 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Acetyl | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| starch | 2927, 1650, 1540 | Hydroxyl (O-H), Methacrylate, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2927 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“The luminescent properties cm-1 peak at 2927 corresponds to the C-H stretching vibraof ZrO are greatly affected by these intrinsic defects as they 2 cm-1 tions [39] and the observed peak at 2348 is related to introduces the donor or accepte”
Study of Copper Doped Zirconium Dioxide Nanoparticles Synthesized via Sol–Gel Technique for Photocatalytic Applications DOI: 10.1007/s10904-020-01616-4 -
Alkyl C-H Vertrauen 1,0
“The stretching of hydroxyl group (─OH) of starch was presented by a peak at 3291 cm-1 whereas the starch methyl group at 3291cm-1 2927 cm-1.”
Ashri 等 - 2018 - Modified Dioscorea hispida starch-based hydrogels DOI: 10.1016/j.ijbiomac.2017.10.125 -
Alkyl C-H Vertrauen 1,0
“cm-1 3435 the diffraction angles of and The reason for could be attributed to O-H stretching, while cm-1 thisphenomenonisthatthecrystalstructureofstarchinthe 2927 was the C-H asymmetric stretching vibration abcommercialbabyricenoodlesissign”
Cao 等 - 2020 - Optimization of the preparation process of mung be DOI: 10.1515/ijfe-2020-0025 -
Alkyl C-H Vertrauen 1,0
“The cm-1, The NK native rice starch had a wider peak at 2927 which was due to the stretching vibration peak of C-H (Figure 4).”
Formation of Intermediate Amylose Rice Starch–Lipid Complex Assisted by Ultrasonication DOI: 10.3390/foods11162430 -
Alkyl C-H Vertrauen 1,0
“Between them, the spectra of LBQ had two peaks at 2972 cm-1 (C-H stretching of the methylene bridges) and 2927 cm-1 (C-H stretching vibration) [41-43], and the absorbance of LBG and LBN was only at 2928 or 2927 cm-1, respectively.”
Comparative Analysis of the Phenolic Profile of Lycium barbarum L. Fruits from Different Regions in China DOI: 10.3390/molecules27185842 -
Water (H2O) Vertrauen 1,0
“1599 1599 1598 1598 Vibrations of water molecule 2927 2927 2926 2918 Hydrogen bonding 3592 3592 3594 3593 Fundamental stretchingof hydroxyl”
Gold nanoparticles assisted surface enhanced Raman scattering and luminescence of Er3+ doped zinc–sodium tellurite glass DOI: 10.1016/j.jlumin.2014.11.032 -
Alkyl C-H Vertrauen 1,0
“strain NRS_38 (Figure 5A) is related to the C-H stretching of the -CH3 group in fatty acids, while the peaks around 2927.30 and Carbon Source Strain NRS_35 (mg/L) Strain NRS_38 (mg/L)”
Characterization of Polyhydroxybutyrate, PHB, Synthesized by Newly Isolated Haloarchaea Halolamina spp. DOI: 10.3390/molecules27217366 -
Alkyl C-H Vertrauen 1,0
“2011) and the abcm-1 sorption peak at 2927 was due to symmetric stretching -CH of (Pan et al.”
Effect of aluminum modification of rice straw–based biochar on arsenate adsorption DOI: 10.1007/s11368-020-02595-2
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.