Was absorbiert bei 2340 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2340 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2340 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbon dioxide | 8 | 7 | 1,0 |
| Alkyl C-H | 3 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 1 | 1,0 |
| C=n | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 2340, 1400, 3430 | Alkyl C-H, Methacrylate, Amide | 1 |
| nanoparticles | 2340, 1732, 1647 | Alkyl C-H, Methacrylate, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2340 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Adsorbed carbon monoxide Vertrauen 1,0
“(A) Changes in the IR peak at around 2100 after switching to a flow of 2.5% O and (B) corresponding changes in the peak 2 cm-1, intensity (curve b) and intensity of the adsorbed CO peak (2340 curve a).”
In Situ Transient FTIR and XANES Studies of the Evolution of Surface Species in CO Oxidation on Au/TiO<sub>2</sub> DOI: 10.1021/jp0568733 -
Carbon dioxide Vertrauen 1,0
“cm-1) (≈2340 some of the spectra in Figure 10 show a carbon dioxide band and artefacts Note that some of the spectra in Figure 10 show a carbon dioxide band (≈2340 cm-1) and cm-1.”
Complexation of Anthocyanin-Bound Blackcurrant Pectin and Whey Protein: Effect of pH and Heat Treatment DOI: 10.3390/molecules27134202 -
Amide Vertrauen 1,0
“The promiin Figure 4A-C, a new peak at 2340 related to the = nent peaks in the spectrum of the original nanofibers MnO 4-C N conjugation appeared, which, together with cm-1”
Zargham 等 - 2014 - Influence of KMnO4 concentration and treatment tim DOI: 10.1515/epoly-2014-0080 -
Carbon dioxide Vertrauen 1,0
“cm-1 1200 The band at 2340 corresponds to the appearance of carbon dioxide in 355 the thin layer as a result of the complete oxidation of glycerol molecule and the 1200 356”
The influence of stepped Pt[n(111)×(110)] electrodes towards glycerol electrooxidation: Electrochemical and FTIR studies DOI: 10.1016/j.electacta.2020.136187 -
Water (H2O) Vertrauen 1,0
“The other peaks around 3406 cm-1,1623 cm-1 cm-1 are related to absorbed water, and 2340 and 2360 cm-1 are attributed to CO 2[28].”
A new method of synthesis well-dispersion and dense Fe3O4@SiO2 magnetic nanoparticles for DNA extraction DOI: 10.1016/j.jmmm.2017.03.025 -
Carbon dioxide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
The influence of adsorbed substances on alkaline methanol electro-oxidation DOI: 10.1016/j.electacta.2018.10.073 -
Alkyl C-H Vertrauen 1,0
“single ZnO and ZnO:N films, there are almost no absorption features above 3000 The IR lines at cm-1 cm-1 2960 and 2850 are assigned to C-H stretching modes, while the absorption features at cm-1 2340 are due to atmospheric CO (seen in all s”
Ivanova 等 - 2020 - Deposition and study of N-In co-doped sol-gel ZnO DOI: 10.1088/1742-6596/1492/1/012027 -
Alkyl C-H Vertrauen 1,0
“For QU-loaded natural saponite and synthetic saponite aliphatic (C-H) band vibration are shown at 2340 cm-1 and 2949 cm-1.”
Kumaresan 等 - 2019 - Synthesis of Saponite Based Nanocomposites to Impr DOI: 10.3390/ph12030105
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.