Was absorbiert bei 1619 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1619 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1619 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 10 | 10 | 1,0 |
| Methacrylate | 7 | 7 | 1,0 |
| Acetate | 7 | 7 | 1,0 |
| Ester | 6 | 6 | 1,0 |
| Carbonyl (C=O) | 6 | 6 | 1,0 |
| Ketone | 5 | 5 | 1,0 |
| Carboxyl (COOH) | 5 | 5 | 1,0 |
| Water (H2O) | 3 | 3 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| N h | 3 | 3 | 1,0 |
| Alkyl C-H | 3 | 2 | 1,0 |
| Alkene (C=C) | 3 | 1 | 1,0 |
| Urea | 2 | 2 | 1,0 |
| Amine primary | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 0 | 1,0 |
| Phosphate (PO4) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polyimide | 1619, 1720, 1778 | Amide, Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1619 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkene (C=C) Vertrauen 1,0
“The peak at 1718.82 cm shows C=C stretching that indicated the presence cm-1 presence of carboxylic groups, while the peak at 1618.82 indicated the C=C stretching presence of peaks at the range of 3300-3700 cm indicated the OH stretching an”
Fatima 等 - 2021 - Extraction and Chemical Characterization of Humic DOI: 10.3390/su13168969 -
Acetate Vertrauen 1,0
“1a), O 30cm-1 down-shift of the 13-keto stretching band about a 4=1655cm-1) ((cid:3) 2=1684→(cid:3) 18O-labelling was observed by of the Hydrogen-bonding of a carbonyl group with a hydroxy or an oxygenatom,whilethechlorinskeletalvibrationsw”
Morishita 和 Tamiaki - 2009 - Specific coupling between the 13-keto carbonyl and DOI: 10.1016/j.saa.2008.09.016 -
Hydroxyl (O-H) Vertrauen 1,0
“3318.91 strong,broad O-H alcohol stretching 1619.25”
Phytochemical Composition of Combretum molle (R. Br. ex G. Don.) Engl. & Diels Leaf and Stem Extracts DOI: 10.3390/plants12081702 -
Aromatic ring Vertrauen 1,0
“The characteristic peaks of aromatic ring cm-1, cm-1 (FTIR), TGA, DSC, tensile properties, dielectric constant skeletal vibrations occurred at 1619 1497 and cm-1.”
Purushothaman 和 Bilal - 2014 - Development and characterization of homo, co and t DOI: 10.1515/polyeng-2013-0167 -
Vertrauen 1,0
“The N-H bending vibrations are also absorbing at 1619 and cm-1.”
Potency of Urea-Treated Halloysite Nanotubes for the Simultaneous Boosting of Mechanical Properties and Crystallization of Epoxidized Natural Rubber Composites DOI: 10.3390/polym13183068 -
Ester Vertrauen 1,0
“The appearance of peak at 1618.53 (CO, amide) and 1455.47 (CN, amide), and the disappearance of ester bands is related to amidation of CA oil to form CADFA [5,17].”
Development of Hydrophobic, Anticorrosive, Nanocomposite Polymeric Coatings from Canola Oil: A Sustainable Resource DOI: 10.3390/polym12122886 -
Hydroxyl (O-H) Vertrauen 1,0
“The band at roughly 3427 corresponds to the stretching cm(cid:0) 1 O-H vibration of water molecules, while the smaller band at approximately 1619 may be caused by the stretching and bending modes of water molecules.”
Enhancing pseudocapacitive properties of cobalt oxide hierarchical nanostructures via iron doping DOI: 10.1016/j.heliyon.2023.e13817 -
N h Vertrauen 1,0
“deformations of the amine bound to the metal-0.933 for 1589/1581cm-1 1586cm-1 A red shift of the amine scissoring modes, occurring at (Raman), 1588/1573cm-1 (FTIR) and (INS), was detected relative to the free diaminopropane ligand and simil”
Batista de Carvalho 等 - 2012 - Pt(II) Complexes with Linear Diamines-Part I Vibr DOI: 10.1155/2012/206297
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.