Was absorbiert bei 1617 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1617 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1617 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 9 | 8 | 1,0 |
| Aromatic ring | 8 | 8 | 1,0 |
| Amide | 6 | 6 | 1,0 |
| Methacrylate | 6 | 5 | 1,0 |
| Acetate | 6 | 5 | 1,0 |
| Alkene (C=C) | 6 | 5 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Ester | 5 | 4 | 1,0 |
| Ketone | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Ring structure | 4 | 4 | 1,0 |
| N h | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 1 | 1,0 |
| C-O single bond | 2 | 1 | 1,0 |
| Aldehyde (CHO) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N n bond | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| activated carbon | 1617, 1575, 1210 | Methacrylate, Aromatic ring | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1617 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“However, these buffer bands are expected if the changes arise solely from amide I changes, broad in comparison to the underlying protein bands and 1617(+) cm-1, particularly the band at which is rather outside occur in only these two region”
Iwaki 等 - 2005 - Direct observation of redox-linked histidine proto DOI: 10.1021/bi047533v -
Amide Vertrauen 1,0
“Peak Assignment of PAL and the Stretching According to the Spectrum of the PAL Casting Film in Figure 1 and the Spectrum of the Si Substrate in Figure 2 (cm-1) peak position assignment N-H 3348 asym stretching of NH2 ((cid:238)) N-H 3200 sy”
Lu 和 Mi - 2005 - Characterization of the interfacial interaction be DOI: 10.1021/ma0486896 -
Hydroxyl (O-H) Vertrauen 1,0
“3411.84 3446 H-O-H bending vibration 1617.15 1617.36 1627.63 1634 Nitrate group stretching 1378.13 1384.4 1384.47 1385”
Investigation on structural, optical and electrical nature of pure and Cr-incorporated cobalt oxide nanoparticles prepared via co-precipitation method for photocatalytic activity of methylene blue dye DOI: 10.1007/s10854-020-04708-6 -
Ring structure Vertrauen 1,0
“of LLC-GEN, at around 1617, 1062, 991, 887 and 789 For GEN, two characteristic cm-1, were assigned to the vibration of the C = C bond in ring peaks, centred at 1617 and 789 B and the C-C-C, C-C and C = O bonds in ring C of the isoflavonoid”
Balazs 等 - 2016 - ATR-FTIR and Raman spectroscopic investigation of DOI: 10.1364/BOE.7.000067 -
N n bond Vertrauen 1,0
“assigned to stretching vibrations of O-H and cm-1 N-H bond, peak at 2890 corresponding to saturated cm-1 C-H stretching vibration, peak at 2325 assigned to cm-1 C=O, band at 1617 corresponding to N=N azo”
Biodegradation and decolorization of azo dyes by adherent Staphylococcus lentus strain DOI: 10.1007/s13765-016-0169-4 -
Alkene (C=C) Vertrauen 1,0
“The peak around 1617 could be attributed to C=C stretching vibration from the aromatic ring and conjugated C=O bond [31].”
Modified Activated Carbon for Copper Ion Removal from Aqueous Solution DOI: 10.3390/pr10010150 -
Amino acid Vertrauen 1,0
“cm-1 The bands at 1617 could be a combination of intermolecular turns sheet structure and the amino acid side chain residue vibration [16].”
Improvement of Functional Properties of Wheat Gluten Using Acid Protease from Aspergillus usamii DOI: 10.1371/journal.pone.0160101 -
Alkene (C=C) Vertrauen 1,0
“Figure 2(c) indicates cm-1 the characteristic bands of pure GA at 3286 (acidic cm-1 O-H stretching), 1712 (presence of phenol group), cm-1 (C=C stretching vibration of aromatic ring), 1617 cm-1”
Dorniani 等 - 2016 - Graphene Oxide-Gallic Acid Nanodelivery System for DOI: 10.1186/s11671-016-1712-2
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.