Was absorbiert bei 1613 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1613 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1613 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carboxyl (COOH) | 6 | 6 | 1,0 |
| Amide | 6 | 5 | 1,0 |
| Carbonyl (C=O) | 5 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Ketone | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 0,7 |
| Protein | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Sodium alginate | 1613, 1636, 1080 | Methacrylate, Carboxyl (COOH), Amide | 1 |
| TiO2 | 1613, 1700, 1093 | Methacrylate, Carboxyl (COOH) | 1 |
| montmorillonite | 1613, 1637, 523 | Methacrylate, Amide, Carboxyl (COOH) | 1 |
| alginate | 1613, 1100, 1715 | Methacrylate, Carboxyl (COOH), Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1613 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
N-O bond Vertrauen 1,0
“The Raman spectra of SCT cm-1 cm-1 1710-1728 compared to no peak for the a peak at about also gave a peak at about 1613 [Figure 6 (bottom),”
Byaruhanga 等 - 2006 - Alteration of kafirin and kafirin film structure b DOI: 10.1021/jf052942z -
Acetate Vertrauen 1,0
“The presence of the PAMAM layer is indicated The full FTIR spectra for the various samples after surface modifications are shown in by distinctive peaks, such as C=O stretching at 1613 cm-1 and N-H bending at 1563 cm-1.”
Surface Heparinization of a Magnesium-Based Alloy: A Comparison Study of Aminopropyltriethoxysilane (APTES) and Polyamidoamine (PAMAM) Dendrimers DOI: 10.3390/jfb13040296 -
Alkene (C=C) Vertrauen 1,0
“C=C stretching band at 1613 While these are a very good forassistancewithexperiments,andM.J.Walter(UniversityofBristol) match,wecannotprovideamechanismofformationforthismolecule.”
Reactions between organic acids and montmorillonite clay under Earth-forming conditions DOI: 10.1016/j.chemgeo.2010.12.023 -
Water (H2O) Vertrauen 1,0
“A swelling at 1613 cm-1 and a depression at 1660 might tentatively be attributed to a slight lower-energy shift of the bending mode of water at cm-1.”
Nakamura 等 - 2003 - In situ FTIR studies of primary intermediates of p DOI: 10.1021/ja029503q -
Vertrauen 1,0
“A peak around 1613 was corresponding to the amine N-H ±”
Green synthesis and characterization of titanium dioxide nanoparticles using leaf extract of Pouteria campechiana and larvicidal and pupicidal activity on Aedes aegypti DOI: 10.1016/j.envres.2021.111333 -
Carboxyl (COOH) Vertrauen 1,0
“Asymmetric carboxylate Symmetric stretching Symmetric COO1613 1417 1417”
El-Bana 等 - 2022 - MOLECULAR STRUCTURE AND OPTICAL ATTRIBUTES OF (Na- DOI: 10.4314/bcse.v36i3.19 -
C c single bond Vertrauen 1,0
“range comes from skeletal vibrations (C-C at 1613 nevertheless, the signal related α,β-unsaturated to C=C vibration of ketones can also be found in this spectral region.”
A Novel FTIR-Based Chemometric Solution for the Assessment of Saffron Adulteration with Non-Fresh Stigmas DOI: 10.3390/molecules28010033 -
Hydroxyl (O-H) Vertrauen 1,0
“FTIR spectrum of the native sodium alginate (Figure 2(a)) been observed for iron-crosslinked hydroxamic alginate 3000-3600cm-1 exhibited bands at [21], and it has been attributed to complexation of carboxylic corresponding to O-H 1613cm-1 1”
Furuyama Lima 等 - 2018 - Synthesis and Physicochemical Characterization of DOI: 10.1155/2018/4218270
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.