Was absorbiert bei 1608 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1608 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1608 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Aromatic ring | 24 | 21 | 1,0 |
| Alkene (C=C) | 16 | 15 | 1,0 |
| Carboxyl (COOH) | 7 | 6 | 1,0 |
| C c single bond | 6 | 5 | 1,0 |
| Carbonyl (C=O) | 6 | 4 | 1,0 |
| Ring structure | 5 | 5 | 1,0 |
| Alkyl C-H | 5 | 4 | 1,0 |
| N h | 4 | 4 | 1,0 |
| Amide | 4 | 3 | 1,0 |
| Methacrylate | 4 | 3 | 1,0 |
| Acetate | 3 | 2 | 1,0 |
| Hydroxyl (O-H) | 3 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Ketone | 2 | 1 | 1,0 |
| Ester | 2 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| epoxy resin | 1608, 905, 1100 | Aromatic ring | 1 |
| graphene oxide | 1608, 1150, 3400 | Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1608 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkene (C=C) Vertrauen 1,0
“In both cases the characteristic absorption bands are showed: 1509 and 1608 cm-1 (C=C bonds of aromatic ring), 1457 cm-1 (CH2 group vibration), 1362 cm-1 (methyl group vibration) and”
Barbadillo 等 - 2003 - Study of a curing reaction of an epoxy resin DOI: 10.4028/www.scientific.net/MSF.426-432.2163 -
Vertrauen 1,0
“The Raman spectra 29 licensed cm(cid:1)1 cm(cid:1)1, on and 1350 corresponding to G presented characteristic peaks of graphene oxide at 1608 Published Si-O identified and D bands, respectively.”
Specific capture of glycosylated graphene oxide by an asialoglycoprotein receptor: a strategic approach for liver-targeting DOI: 10.1039/c8ra09732a -
Alkene (C=C) Vertrauen 1,0
“peaks at 1608 and 1646 Both peaks can be assigned to carbon-carbon double bond stretching, the cm(cid:2)1 peak at 1608 arising from a carbon-carbon double bond of an aromatic ring and the peak at 1646 cm(cid:2)1 arises from the alkene group”
Fox 等 - 2004 - Investigation of failure mechanisms in aged aerosp DOI: 10.1016/j.engfailanal.2003.05.010 -
Carbonyl (C=O) Vertrauen 1,0
“At 1735 isolate and chitosan coacervates by increasing the pH of cm-1, formation, due probably to the rising of the pH above the pI and 1608 stretching absorption bands of carbonyl (C=O) groups present in esterified carboxylic acid groups o”
Garcia-de la Rosa 等 - 2023 - Rheological and structural properties of complex c DOI: 10.24275/rmiq/Alim3003 -
Alkene (C=C) Vertrauen 1,0
“their C=C absorption peaks at 1608 and 1522 Flour from the outer part of the kernel (corneous endosperm) had greater Pearson's protein and lipid absorbance while the inner kernel (floury endosperm) had stronger starch absorbance.”
Qualitative and Quantitative Analysis of Sorghum Grain Composition Including Protein and Tannins Using ATR-FTIR Spectroscopy DOI: 10.1007/s12161-020-01874-5 -
C c single bond Vertrauen 1,0
“Text: 'dominant peaks at 3327 and 1608 ... (C--C, C--O)'”
Maimulyanti 等 - 2019 - Adsorption and recovery of aroma compounds from wa DOI: 10.2306/scienceasia1513-1874.2019.45.446 -
C c single bond Vertrauen 1,0
“The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance -1 intensities of aliphatic C=C (peak at 1638 cm ) against an internal standard before and after the curing of the ° -1 specimen: aromatic C”
Rastelli 等 - 2008 - Degree of Conversion and Temperature Increase of a DOI: 10.1134/S1054660X0812030X -
C c single bond Vertrauen 1,0
“The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of the absorbance -1 intensities of aliphatic C=C (peak at 1638 cm ) against an internal standard before and after the curing of the -1 specimen: a”
Rastelli 等 - 2008 - Effect of power densities and irradiation times on DOI: 10.1134/S1054660X08090132
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.