Was absorbiert bei 1536 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1536 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1536 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 7 | 7 | 1,0 |
| Alkyl C-H | 5 | 5 | 1,0 |
| Secondary amine | 4 | 4 | 1,0 |
| N h | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Aromatic ring | 4 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| C c single bond | 2 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Nitro (NO2) | 1 | 1 | 0,7 |
| Nitrogen heterocycle | 1 | 0 | 1,0 |
| Ring structure | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| nanocellulose | 1536, 1540, 1646 | Alkyl C-H, Amide | 1 |
| cellulose | 1536, 1735, 1650 | Alkyl C-H, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1536 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“Amide II bands appear ~ 1536 CH asymmetric stretching vibration by 25% and 56% were”
Spectral profile index changes as biomarker of toxicity in Catla catla (Hamilton, 1822) edible fish studied using FTIR and principle component analysis DOI: 10.1007/s42452-020-3001-z -
Acetate Vertrauen 1,0
“The reduced C=O and C=C peaks at 1734 cm-1 and 1536 cm-1, respectively, in the Fourier-transform Infrared (FTIR) spectra of isolated NC, confirmed the removal of appreciable amounts of hemicellulose and lignin components in the OPL fibers.”
Shunmugam 等 - 2021 - TAGUCHI ORTHOGONAL DESIGN FOR OPTIMIZING A UNIFIED DOI: 10.11113/jurnalteknologi.v83.15109 -
Alkyl C-H Vertrauen 1,0
“From this data, it can be seen that the MAPP spectrum contains peaks at 2916, 2855 and 1536 cm-1, which is specifically attributed to the characteristic stretching absorption peaks of -CH2-CH2and NH3+ ions.”
Abuhimd 等 - 2020 - Influence of Magnesium Aluminate Nanoparticles on DOI: 10.3390/coatings10100968 -
Alkyl C-H Vertrauen 1,0
“Peaks at 1536 cm-1 correspond to C-H bending (aromatic compounds) or C=C=C stretching (alkene).”
Characterizations of Alpha-Cellulose and Microcrystalline Cellulose Isolated from Cocoa Pod Husk as a Potential Pharmaceutical Excipient DOI: 10.3390/ma15175992 -
N h Vertrauen 1,0
“On the other cm-1 hand, the absorption at 1536 is attributed to the bending deformations related to the NH group of the formed urethane bond [32].”
Synthesis and Characterizations of Eco-Friendly Organosolv Lignin-Based Polyurethane Coating Films for the Coating Industry DOI: 10.3390/polym14030416 -
C c single bond Vertrauen 1,0
“are denoted in the cm-1 P2 FTIR spectrum by the 3056 band (P2) specific to (ar)C-C groups [21] and the cm-1 1536 band specific to the skeletal vibrations of the aromatic bonds, C=C, reported in cm-1-1550 cm-1 literature as being in the rang”
The Origin and Physico-Chemical Properties of Some Unusual Earth Rock Fragments DOI: 10.3390/app12030983 -
Amide Vertrauen 1,0
“05 amide II, which originates from N-H deformation, shifts 1536cm-1.”
Dyakonov 等 - 2012 - Design and characterization of a silk-fibroin-base DOI: 10.1155/2012/490514 -
Carboxyl (COOH) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
An infrared spectroscopic study of the nature of zinc carboxylates in oil paintings DOI: 10.1039/c5ja00120j
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.