Was absorbiert bei 1271 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1271 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1271 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 5 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 3 | 1,0 |
| Methacrylate | 4 | 3 | 1,0 |
| Acetate | 4 | 3 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polyimide | 1271, 1720, 1778 | Methacrylate, Acetate | 1 |
| PVC | 1271, 834, 1195 | Methoxy (OCH3), Methacrylate, Acetate | 1 |
| cellulose | 1271, 1735, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
| HDPE | 1271, 1369, 1216 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1271 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Lignin Vertrauen 1,0
“The most characteristic vibrations of lignin correspond to thoseofaromaticringsatapproximately1599and1509cm(cid:2)1.Thetypicalbandsassignedto identifiedat1271and1216cm(cid:2)1(guaiacylringbreathing) guaiacyl(G)moietieswere and cm(cid:2)1 cm”
Synthesis and characterization of lignin–melamine–formaldehyde resin DOI: 10.1177/0892705716632856 -
Hydroxyl (O-H) Vertrauen 1,0
“The peak at about 1271 and 3478 were due in CP2, TP1, to OH stretching vibration of free acid groups and N-H TP2 and TP3 was assigned to C-F vibration.”
Purushothaman 和 Bilal - 2014 - Development and characterization of homo, co and t DOI: 10.1515/polyeng-2013-0167 -
Acetate Vertrauen 1,0
“(10/90) 10/90 6/94 0.18 cm-1, teristic of ester groups, and another typical band at 1271 assigned to the C-O-C (20/80)”
Isosorbide and 2,5-Furandicarboxylic Acid Based (Co)Polyesters: Synthesis, Characterization, and Environmental Degradation DOI: 10.3390/polym14183868 -
Acetate Vertrauen 1,0
“The band at 1123 cm-1 corresponds to planar cm-1 at 1327 belongs to the skeletal vibrations of the syringyl ring with the C-O stretching bending vibrations of the C-H syringyl aromatic rings, and the C-O stretching vibrations bands around 1”
An Efficient Method of Birch Ethanol Lignin Sulfation with a Sulfaic Acid-Urea Mixture DOI: 10.3390/molecules27196356 -
Ester Vertrauen 1,0
“Furthermore, the bands at cm-1 cm-1 cm-1 1271 and 1724 are characteristic of the ester group and the band at 729 represents the cm-1 aromatic ring of the phthalate group [37].”
Nolasco 等 - 2022 - Morphology, Chemical Characterization and Sources DOI: 10.21203/rs.3.rs-1166452/v1 -
Acetate Vertrauen 1,0
“the C-O stretching vibration peak at 1271 and cm-1, the aromatic skeleton (=C-H) stretching vibration at 3000-3020 which was coincided with decrease of O and H”
Xu 和 Li - 2017 - Effect of High-pressure on Pine Sawdust Pyrolysis DOI: 10.1063/1.4992933 -
Vertrauen 0,9
“Explicit assignment: '1271 (s, ester stretch C-O)'”
Rezende 等 - 2020 - Efficient internal plasticization of poly(vinyl ch DOI: 10.1016/j.polymer.2020.122473 -
C-O single bond Vertrauen 0,7
“Band at approx. 1271 cm-1 assigned to C-C(=O)-O.”
Chemometric approach to characterization of the selected grape seed oils based on their fatty acids composition and FTIR spectroscopy DOI: 10.1038/s41598-021-98763-6
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.