Was absorbiert bei 1130 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1130 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1130 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 13 | 12 | 1,0 |
| Methoxy (OCH3) | 11 | 10 | 1,0 |
| Methacrylate | 11 | 10 | 1,0 |
| Acetate | 11 | 10 | 1,0 |
| Alkyl C-H | 5 | 5 | 1,0 |
| Secondary amine | 4 | 4 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| C c single bond | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 2 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Ring structure | 3 | 3 | 1,0 |
| Aromatic ring | 3 | 2 | 1,0 |
| Silicon (Si) | 3 | 1 | 1,0 |
| S eq o | 2 | 2 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Perchlorate | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Boron nitrogen | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| diamond | 1130, 1378, 1332 | Methoxy (OCH3) | 1 |
| polyaniline | 1130, 1565, 1570 | Methacrylate, Acetate | 1 |
| copolymer | 1130, 2921, 1540 | Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1130 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
S eq o Vertrauen 1,0
“The bands around 1130 and 1150cm(cid:1)1 are due to the symmetric SO stretching and SO 2”
Synergistic effect of copolymers composition on the electrochemical, thermal, and electrical behavior of 5-lithiosulphoisophthalic acid doped poly(aniline-co-2-isopropylaniline): synthesis, characterization, and applications DOI: 10.1002/pat.1359 -
Acetate Vertrauen 1,0
“It is a well resolved peak with its maximum at 1130 resulting from asymmetric stretching vibrations of a C-O-C bond system [39].”
Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications DOI: 10.1016/j.apsusc.2017.03.223 -
Aromatic ring Vertrauen 1,0
“modes with Olefinic and aromatic structures are associated with a broad absorption band between 1130 and 1550”
De 等 - 2011 - Fourier-Transform Infrared Absorption Study of the DOI: 10.1063/1.3605921 -
Vertrauen 1,0
“2700-3500 has absorption bands at 1130 and 1344 due to nitrogen in hydrogen-related vibration at From the IR impurities predominantly in the form of C-center (single subspectra, we notice that the hydrogen-related modes locate at”
Fang 等 - 2016 - HPHT synthesis of N-H co-doped diamond single crys DOI: 10.1016/j.jcrysgro.2015.11.042 -
Boron nitrogen Vertrauen 1,0
“=𝜇(1282cm-1)/𝜇(2120cm-1) × 5.5 × 16.5, out h-BN additive displayed typical yellow due to the 𝜇(1130cm-1), 𝜇(1282cm-1) 𝜇(2120cm-1) involvement of nitrogen impurities, which is inevitable where and 2120cm-1, in the synthesis cell.”
B–C Bond in Diamond Single Crystal Synthesized with h-BN Additive at High Pressure and High Temperature DOI: 10.1088/0256-307X/33/2/028101 -
Vertrauen 1,0
“Characteristic absorption for C-centers (single substitutional N atoms).”
Li 等 - 2017 - Synthesis of n-type semiconductor diamond single c DOI: 10.1088/1757-899X/274/1/012131 -
Alkyl C-H Vertrauen 1,0
“3 of 85PVAc:15LiClO polymer-salt complex the 4 peaksat1130,1438and1726cm-1 areascribedtoC-O-Csymν(C metric stretching, C-H bending and O) stretching vibrations of pure PVAc.”
Selvasekarapandian 等 - 2006 - Laser Raman and FTIR studies on Li+ interaction in DOI: 10.1016/j.saa.2006.02.026 -
Alkyl C-H Vertrauen 1,0
“The negative鄄going band at 1710 is the stretching vibration peak of carboxyl group of aromatic al鄄 cm-1 dehydes, and the positive鄄going band at 1130 shows the consumption peak of methyl of toluene deriva鄄 tions.”
Zhu 等 - 2013 - Direct Electro-oxidation of Toluene Derivations on DOI: 10.7503/cjcu20121107
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.