Was absorbiert bei 989 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 989 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 989 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| C-O single bond | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Phosphate (PO4) | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Nucleic acid | 2 | 2 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 0,9 |
| Metal hydroxyl | 1 | 1 | 0,9 |
| Metal oxygen | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PE | 989, 1414, 1700 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| PP | 989, 1700, 1043 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 989 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“The absorption band from 1,140 to 1,251 be attributed to the C-O-C 989cm-1 cm-1 stretching vibration and is the characteristic absorption vibration of PMMA, The band at 1,731 is the 1,445cm-1 representative of acrylate carboxyl group.”
Naik 等 - 2019 - Optical and Electrical Properties of TCNQ Doped PM DOI: 10.1063/1.5100466 -
Hydroxyl (O-H) Vertrauen 1,0
“The band at 988.67 cm-1 suggests OH deformation linked to 2Al2;”
Foliar Application of Nanoclay Promotes Potato (Solanum tuberosum L.) Growth and Induces Systemic Resistance against Potato Virus Y DOI: 10.3390/v14102151 -
Acetate Vertrauen 1,0
“Another band at 989 was assigned to a C-O-CH vibration of the ester group.”
Optical photothermal infrared spectroscopy with simultaneously acquired Raman spectroscopy for two-dimensional microplastic identification DOI: 10.1038/s41598-022-23318-2 -
Silicon (Si) Vertrauen 1,0
“A study of fly ash cm-1 activation reports an intense band in 989 related to Si-O asymmetric stretching vibration, which explains that the lower wavenumber of this band was associated with a lower degree of crosslinking of the amorphous pha”
Concepcion Rodriguez-Robledo 等 - 2018 - Cellulose-Silica Nanocomposites of High Reinforcin DOI: 10.3390/ma11040575 -
Phosphate (PO4) Vertrauen 1,0
“The bands at 989, cm-1 1083, and 1156 could be assigned to the asymmetric stretching vibration of P-O-P bonds linked with large met-”
Enhancement of structural and optical properties of transparent sodium zinc phosphate glass–ceramics nano composite DOI: 10.1007/s41779-022-00716-3 -
Nucleic acid Vertrauen 1,0
“The bands at 989 1238 and 1091 were 42assigned to PO (nucleic acids), antisymmetric and symmetric stretching modes of 2-) phosphates (PO found in DNA (Barth et al., 1995;”
Le Roux 等 - 2015 - Fourier Transform Infrared spectroscopy discloses DOI: 10.1016/S0301-4622 -
Acetate Vertrauen 1,0
“cm-1 stretch (1154-1155 It is worth noting that the band at 989 associated with C-O-H bending vibration at the C6 position, indicating the stretch of the interchain interaction via hydrogen bonding cm-1 for PUL, was found in the PUL powder”
Li 等 - 2017 - Electrospinning Pullulan Fibers from Salt Solution DOI: 10.3390/polym9010032 -
Protein Vertrauen 1,0
“Across the PC1 versus PC2 scores plot, the untreated and washed isolates clustered together cm-1, cm-1, cm-1 cm-1, along PC1 due to loadings bands at 1634 1084 1047 and 989 which were along PC1 due to loadings bands at 1634 cm-1, 1084 cm-1,”
Influence of the Sample Preparation Method in Discriminating Candida spp. Using ATR-FTIR Spectroscopy DOI: 10.3390/molecules25071551
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.