Was absorbiert bei 924 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 924 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 924 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Oxalate | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 924, 1650, 1655 | Acetate, Methacrylate, C-O single bond | 2 |
| silver nanoparticles | 924, 1636, 1631 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 924 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“cmK1 cmK1 g centered around 970 can be assigned to OH, the out-ofto an Evans phenomenon is less obvious, but it 1440 plane bending of the O-H bond, while the sharp peaks at 924, cannot be entirely excluded.”
Hansen 等 - 2006 - Intramolecular hydrogen bonding. Spectroscopic and DOI: 10.1016/j.molstruc.2005.10.051 -
Secondary amine Vertrauen 1,0
“N-H presence of the sharp peak at 3,422.13 stands for cm-1 stretch (primary, secondary amines, amides), 2,924.12 cm-1 H-C=O: C-H stretch (aldehydes), 2,851.76 stands cm-1 C-C for OH (intramolecular bonds), 1,631.41 for cm-1 (in-ring) stretc”
Marimuthu 等 - 2012 - Lousicidal activity of synthesized silver nanopart DOI: 10.1007/s00436-011-2667-y -
Acetate Vertrauen 1,0
“The increasein prominence of Peak bands between 924 and 925 were due to the contribution C-O, C-O-H C-O-C the pores with increase in glycerol content could be due to hydrophobic of saccharide structure.”
Alimi 等 - 2022 - Microstructural and physicochemical properties of DOI: 10.1016/j.heliyon.2022.e09148 -
Amide Vertrauen 1,0
“In C-O, C-C, C-H (genipin) 3089, 1441, 721 2320 cm-1 addition, the C-N stretching of amide III at 1233 shifted to 1260 C-C, C-O, C-N (absorption 2884, 2683, 1952 1955, 1334, 1090, 924 cm-1 cm-1, after crosslinking with genipin, while the pe”
Delgadillo-Armendariz 等 - 2014 - INTERACTIONS OF CHITOSANGENIPIN HYDROGELS DURING DOI: 10.5935/0100-4042.20140243 -
Acetate Vertrauen 1,0
“2 cm-1) -OH scissoring bends at 1454 and 1415 and (ii) contribution to related vibrations cm-1 cm-1 in 3000-3500 (O-H stretches) and in 1150-800 (C-O stretches), where the presence of glycerol is usually accompanied by characteristic asymme”
Incorporation of Natural Blueberry, Red Grapes and Parsley Extract By-Products into the Production of Chitosan Edible Films DOI: 10.3390/polym13193388 -
Vertrauen 1,0
“También es posible observar bandas de un 2533, 1808, 1446, 870, and 716 cm-1, although bands from an compuesto de silicio no cristalino a 1110 (Si-O) y 924 cm-1 (C-O) organic molecule at 2945, 2889 (C-H), and 1034 cm-1 can be seen in and (S”
Fragoso 等 - 2010 - Characterization of the CaCO3 biomineral in corall DOI: 10.7773/cm.v36i1.1606 -
Nucleic acid Vertrauen 1,0
“cm-1 cm-1 of the bands at about 924 and 996 indicate the This indicates the possibility of some biochemical changes presence of changes on the level of DNA and RNA synthesis, occurring during cell culture associated only with the culture re”
Lach 等 - 2021 - First Identification of the Effects of Low Frequen DOI: 10.4103/jmp.jmp_57_21 -
Alkyl C-H Vertrauen 1,0
“The intensity of the signal for C-H out-of-plane bending (924 cm-1) decreased gradually upon increasing the curing temperature;”
Lin 等 - 2017 - Coumarinand Carboxyl-Functionalized Supramolecul DOI: 10.3390/polym9040146
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.