Was absorbiert bei 915 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 915 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 915 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Oxygen heterocycle | 8 | 7 | 1,0 |
| Hydroxyl (O-H) | 5 | 4 | 1,0 |
| Silicon (Si) | 3 | 3 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 2 | 1,0 |
| Alkyl C-H | 3 | 2 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 0,9 |
| N-O bond | 1 | 0 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 0,9 |
| Metal hydroxyl | 1 | 0 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| epoxy resin | 915, 905, 1100 | Oxygen heterocycle | 1 |
| clay | 915, 1736, 2855 | Silicon-oxygen (Si-O), Hydroxyl (O-H), Silicon (Si) | 1 |
| epoxy | 915, 1660, 1735 | Oxygen heterocycle | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 915 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“In both cases the characteristic absorption bands are showed: 1509 and 1608 cm-1 (C=C bonds of aromatic ring), 1457 cm-1 (CH2 group vibration), 1362 cm-1 (methyl group vibration) and 915 cm1 (epoxy ring).”
Barbadillo 等 - 2003 - Study of a curing reaction of an epoxy resin DOI: 10.4028/www.scientific.net/MSF.426-432.2163 -
Hydroxyl (O-H) Vertrauen 1,0
“cm-1, NaC and OC, there are absorption bands at the frequencies 3626, 3629, and 3625 which refer to the stretching vibrations of the (O-H) bonds in Al-OHs, respectively, and cm-1, conjugated to them the bending vibrations at 915, 916, and 9”
Enhanced Coating Protection of C-Steel Using Polystyrene Clay Nanocomposite Impregnated with Inhibitors DOI: 10.3390/polym15020372 -
Amide Vertrauen 1,0
“In cm-1 cm-1, 5-10cm-1 by 40 downshifts the broad band from 1,653 redshift in their particular, two bands exhibit a ν(CH 13C-labelling agreeing well with the expected behavior of the amide I mode 2) stretching frequencies upon of methylene”
Baserga 等 - 2022 - Membrane Protein Activity Induces Specific Molecul DOI: 10.3389/fmolb.2022.915328 -
Oxygen heterocycle Vertrauen 1,0
“spectrum of epoxy-paint indeed shows the disappearance of the The irradiated samples are characterized by absorption bands cm(cid:2)1 band at 915 characteristic of the deformation of the epoxy cm(cid:2)1.”
A FTIR/chemometrics approach to characterize the gamma radiation effects on iodine/epoxy-paint interactions in Nuclear Power Plants DOI: 10.1016/j.aca.2017.01.005 -
Hydroxyl (O-H) Vertrauen 1,0
“The presence of cm-1, 915 attributed to OH deformations of kaolinite, is visible up to temperatures of 500 the doublets at 915 cm-1, attributed to OH deformations of kaolinite, is visible up to tem-”
The Interdisciplinary Approach of Some Middle Bronze Age Pottery from Eastern Romania DOI: 10.3390/app11114885 -
Alkyl C-H Vertrauen 1,0
“The vibration at a 915cm(cid:5)1canalsobeattributedtotheSi(cid:5)CH nbonds.[37,38]A s>3008C values observed for films deposited at T are Si(cid:5)(CH n(cid:5)Si comparabletotheR significant decrease in the intensity of aobservedforSiN xfilm”
Atmospheric Pressure Plasma CVD of Amorphous Hydrogenated Silicon Carbonitride (aSiCN:H) Films Using Triethylsilane and Nitrogen DOI: 10.1002/ppap.201100035 -
Hydroxyl (O-H) Vertrauen 1,0
“The shoulder 1111, 1095, 1037, 1020, and 1000 cm-1 Al/Mg20-30 μm corresponds to bending of <20, for bare fallow, native steppe, and cropland: with a maximum at 915 cm-1 O-H vibrations.57 The 860 band corresponds to bending these bands have”
Krivoshein 等 - 2022 - FTIR Photoacoustic and ATR Spectroscopies of Soils DOI: 10.1021/acsomega.1c05702 -
Vertrauen 1,0
“FA-1 shows a shoulder peak at about 915 cm-1 associated with the presence of aluminum in the octahedral of FA-2 are sharper than the bands for FA-1, which is attributed to the increased order of the silicate position, confirming the existen”
Structural Characterizations of Aluminosilicates in Two Types of Fly Ash Samples from Shanxi Province, North China DOI: 10.3390/min9060358
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.