Was absorbiert bei 905 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 905 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 905 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Oxygen heterocycle | 3 | 3 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Silicon hydride | 1 | 1 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Thiol | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| LDPE | 905, 1720, 1737 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 905 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“Explicit assignment: 'chain scission (905'”
Biodegradation of Unpretreated Low-Density Polyethylene (LDPE) by Stenotrophomonas sp. and Achromobacter sp., Isolated From Waste Dumpsite and Drilling Fluid DOI: 10.3389/fmicb.2020.603210 -
C-S single bond Vertrauen 1,0
“The formation of C-S-H gel is denoted by a progressive shift in the O-Si-O stretching vibrations from 905 to cm-1 29Si 995 in the FTIR spectrum during 1 week.”
The Application of 29Si NMR Spectroscopy to the Analysis of Calcium Silicate-Based Cement using Biodentine™ as an Example DOI: 10.3390/jfb10020025 -
Vertrauen 1,0
“S2 of the supplemented file, and the lattice of S1000 expands compared to S600 and S800, the peak at 905 K is related not to the oxygen absorption into the particle but to the oxygen redistribution from the absorbed oxygen to the”
Control of magnetic properties and band gap by Co/Mn ordering and oxygen distributions of La2CoMnO6 DOI: 10.1016/j.jmmm.2017.03.040 -
Oxygen heterocycle Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Radzir 等 - 2015 - Effect of lithium bis(trifluoromethylsulfonyl)imid DOI: 10.1007/s10008-015-2910-z -
Amide Vertrauen 1,0
“The weak to medium vibrational bands at 1045 and 1264cm-1 sharpandintensebandsat722,946,1154,1366,and1414cm-1 can be assigned to C-N stretching from 1200 to , 905cm-1 rocking from TETS/HEXS, and the shoulder at and CH2”
Dernaika 等 - 2014 - Spectroscopic Identification of Neurotoxin Tetrame DOI: 10.1155/2014/207258 -
Amine primary Vertrauen 1,0
“cm(cid:0) C-O N-H 1 1130 (stretching C-OH in primary alcohol and stretching (corresponding to bending vibration in secondary amine and/or cm(cid:0) 1 -OH 1074-1061 - (secondary stretching), 905 from ester group), primary amine band in plane”
Functionalization of poly(glycidylmethacrylate) with iminodiacetate and imino phosphonate groups for enhanced sorption of neodymium - sorption performance and molecular modeling DOI: 10.1016/j.reactfunctpolym.2022.105389 -
Ring structure Vertrauen 1,0
“The cm-1 absorption peak at 905 represents the vibration of C1-H group and the ring and is a characteristic peak of b-glucosidic bond of glucose.”
Hu 等 - 2021 - Pyrolytic Characteristics and Kinetics of Guanzhon DOI: 10.1016/j.fuel.2014.01.014 -
Alkene (C=C) Vertrauen 1,0
“The band with the maximum at ~905 present in both oil samples cis-substituted can be attributed to the stretching vibrations of olefin groups, which may be additionally enhanced by the vibrations of the vinyl group.”
Comparative Analysis of Phytochemicals and Antioxidant Properties of Borage Oil (Borago officinalis L.) and Milk Thistle (Silybum marianum Gaertn) DOI: 10.3390/app13042560
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.