Was absorbiert bei 3397 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 3397 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 3397 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 13 | 13 | 1,0 |
| Water (H2O) | 3 | 3 | 1,0 |
| N h | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polysaccharide | 3397, 1637, 1320 | Hydroxyl (O-H), N h | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 3397 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“The AAP-NPs and AAP shared a broad band in the cm-1, and both had a strong characteristic absorption peak at 3397 which was caused by the 3000-3750 cm-1 region, and both had a strong characteristic absorption peak at 3397 cm-1, O-H stretchi”
Formation Optimization, Characterization and Antioxidant Activity of Auricularia auricula-judae Polysaccharide Nanoparticles Obtained via Antisolvent Precipitation DOI: 10.3390/molecules27207037 -
Hydroxyl (O-H) Vertrauen 1,0
“Characteristic data for NS particm(cid:2)1 cles are absorption peaks at 3397 and 1106 t=B A 100 ð1Þ DC% 1 ð Þ (cid:3) ¼ (cid:2) t0 related to hydroxyl and Si-O-Si groups, respectively.”
Ghaemy 和 Bekhradnia - 2012 - Thermal and photocuring of an acrylate-based coati DOI: 10.1007/s11998-012-9401-2 -
Hydroxyl (O-H) Vertrauen 1,0
“Disappearance of carbonyl peak and theappearance of sharp cm21 And secondly, the two hydroxy groups of different fullerene hydroxy peak at 3396.6 in the product also suggested cores may react with two carbonyl groups of the same epoxy that”
Goswami 等 - 2003 - A selective reaction of polyhydroxy fullerene with DOI: 10.1016/S0032-3861(03)00241-6 -
Hydroxyl (O-H) Vertrauen 1,0
“These peaks are similar observed with cm-1 the FTIR result of GO with absorption peaks at 3397, 1730 and 1624 are assigned to (OH), (C=O), (C=C), respectively, that has been reported by Liu et al.”
Synthesis, Characterization, and Performance of Graphene Oxide and Phosphorylated Graphene Oxide as Additive in Water-Based Drilling Fluids DOI: 10.1016/j.apsusc.2019.145005 -
Hydroxyl (O-H) Vertrauen 1,0
“the time and added enzyme effects were evaluated, cm-1) which resulted in the conversion of 50 and 45% of the unsaturation peak (3009 for the 24 h reactions with and without acrylic immobilization, respectively, in addition to cm-1), altera”
Montenegro 等 - 2023 - Enzymatic and Synthetic Routes of Castor Oil Epoxi DOI: 10.3390/polym15112477 -
Ammonium Vertrauen 1,0
“3397 The first two peaks can be assigned to s(NH 3) (cid:238)”
Pena 等 - 2004 - Identification of surface species on titania-suppo DOI: 10.1021/jp0313122 -
Hydroxyl (O-H) Vertrauen 1,0
“The typical peak at 3397 with stretching mode of vibration seen in the unpurified spectrum is attributed to the presence of alcohol (O-H) group.”
Chemometric analysis of cow dung ash as an adsorbent for purifying biodiesel from waste cooking oil DOI: 10.1038/s41598-017-09881-z -
Lipid Vertrauen 1,0
“cm-1, ThePC2loadingplotshowsremarkablepositivevaluespeakingat3736, 3461, 3397 cm-1, 3022sh, 2962, 2926, 2878sh, and 2857 characteristic of lipids.”
The Role of the Preanalytical Step for Human Saliva Analysis via Vibrational Spectroscopy DOI: 10.3390/metabo13030393
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.