What absorbs at 2335 cm⁻¹ in an FTIR spectrum?
A band near 2335 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Resposta rápida
A band near 2335 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Thiol | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
A classificação reflete a evidência acumulada da literatura, não uma única regra autoritária. Sempre confirme com o contexto da sua amostra.
Materiais possíveis
| Material | Picos de suporte | Grupos sobrepostos | Fontes citadas |
|---|---|---|---|
| polyurethanes | 2335, 1740, 1728 | Methacrylate, Urethane | 1 |
| edible oils | 2335, 1743, 1064 | Methacrylate | 1 |
| GO | 2335, 1720, 1182 | Methacrylate | 1 |
| RGO | 2335, 2358, 2930 | Methacrylate | 1 |
Os materiais são mostrados apenas quando o mesmo conjunto de literatura suporta esta banda e pelo menos um pico característico adicional.
Lógica do espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2335 cm⁻¹ is usually not enough for material identification by itself.
Uso no mundo real
Este tipo de consulta é comum em identificação de polímeros, triagem de plásticos desconhecidos, solução de problemas de CQ, verificação de materiais reciclados e revisão de atribuição de picos apoiada pela literatura.
Erros comuns
- Tratar uma banda isolada como prova de um material sem verificar pelo menos um ou dois picos de suporte.
- Ignorando sobreposição: vários grupos funcionais podem contribuir próximo ao mesmo número de onda.
- Ignorar a validação quando aditivos, misturas, oxidação ou contaminação podem distorcer o espectro.
Conselho de verificação
Quando a ambiguidade persistir, valide a hipótese com DSC, GC-MS ou TGA, especialmente para misturas, amostras degradadas e polímeros carregados.
Literatura por trás destas atribuições
-
Acetate confiança 1,0
“However, the three cm-1 peaks appearing in the range between 2270 and 2410 are attributed to urethane groups, while the absorption peak cm-1 at 2335 might be due to C=O stretching (bonded) in cm-1are urethane.”
Analysis of silver nanoparticles produced by chemical reduction of silver salt solution DOI: 10.5755/j01.ms.22.4.12503 -
Carbon dioxide confiança 1,0
“Characteristic cm(cid:1)1 in the carbon dioxide bands at 2335 and 2366 assigned to bands for small (dimeric) and larger water clusters, and bulk- (cid:5)3600, dioxide51 shows that it asymmetric stretching modes of carbon like water are dist”
Ngoc Minh Nguyen Huynh 等 - 2018 - Reduced graphene oxide as a water, carbon dioxide DOI: 10.1039/c8ra03080d -
Thiol confiança 1,0
“cm(cid:2)1 S-H The characteristic bands of at 2335 and 2362 were still γ A method of grafting a mesoporous -alumina layer, supported present with no change in intensity.”
PDMS grafting of mesoporous γ-alumina membranes for nanofiltration of organic solvents DOI: 10.1016/j.memsci.2014.07.010 -
confiança 0,9
“CO absorption band”
Stoichiometric Determination of Moisture in Edible Oils by Mid-FTIR Spectroscopy DOI: 10.1016/j.aca.2016.03.016
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de picos com citações da literatura, correspondências de biblioteca e uma cadeia de evidências com nível de confiança — em segundos.