What absorbs at 2243 cm⁻¹ in an FTIR spectrum?
A band near 2243 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 7 cited sources
Quick answer
A band near 2243 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
가능한 작용기 할당
| 작용기 | 지원 사실 | 인용 출처 | 최고 신뢰도 |
|---|---|---|---|
| Nitrile | 4 | 4 | 1.0 |
| Hydroxyl (O-H) | 1 | 1 | 1.0 |
| Ring structure | 1 | 1 | 1.0 |
| Methacrylate | 1 | 1 | 1.0 |
| Ketone | 1 | 1 | 1.0 |
| Ester | 1 | 1 | 1.0 |
| Carboxyl (COOH) | 1 | 1 | 1.0 |
| Carbonyl (C=O) | 1 | 1 | 1.0 |
| Amide | 1 | 1 | 1.0 |
| Acetate | 1 | 1 | 1.0 |
순위는 단일 권위 규칙이 아닌 축적된 문헌 증거를 반영합니다. 항상 샘플 상황에 대해 확인하세요.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2243 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
이 할당의 배경이 되는 문헌
-
Acetate 신뢰도 1.0
“The bands at 2243 and 1736 cm-1 are due to CN stretching and C=O stretching vibrations, Fabrication of Conductive Composite Films”
Cetiner 等 - 2011 - Characterization of Conductive Poly(Acrylonitrile- DOI: 10.1007/s12221-011-0151-z -
Hydroxyl (O-H) 신뢰도 1.0
“of saturated nitriles at 2243 and peak intensities of hydroxyl O-H band at 3600-3650”
Thongphud 等 - 2011 - Improvement of Hydrophilic Properties on Electrosp DOI: 10.4028/www.scientific.net/AMR.213.103 -
Nitrile 신뢰도 1.0
“2 EXPERIMENTAL PART The intensity of the band at 2243 cm-1 decreases with 2.1 Materials the imidation time significantly, which is ascribed to the decrease of the number of nitrile groups.”
Zhang 等 - 2019 - ISOTHERMAL IMIDATION KINETICS OF POLYMETHACRYLIMID DOI: 10.17222/mit.2019.070 -
Nitrile 신뢰도 1.0
“As shown in the three original nanofibers spectra at room temperature (RT), the characteristic peak at 2243 cm-1 is attributed to the stretching vibration of nitrile group (C≡N) [33,34].”
Liu 等 - 2019 - Preparation, Stabilization and Carbonization of a DOI: 10.3390/polym11071150 -
Nitrile 신뢰도 0.9
“Band at 2243 cm-1 assigned to nitrile groups.”
El-Shishtawy 等 - 2014 - Nucleophilic Addition of Reactive Dyes on Amidoxim DOI: 10.1155/2014/305930 -
Nitrile 신뢰도 0.9
“Explicit assignment: peak at 2243 cm-1 was vibration absorption of -C≡N”
Huang 等 - 2021 - High Selective Isomerization of Glucose to Fructos DOI: 10.1021/acsomega.1c02577 -
신뢰도 0.8
“Band at 2243 cm-1 is an important peak for PAN structure.”
Seydibeyoglu - 2012 - A Novel Partially Biobased PAN-Lignin Blend as a P DOI: 10.1155/2012/598324
이 밴드가 있는 스펙트럼이 있나요?
FTIR 스펙트럼을 업로드하면 몇 초 안에 전체 해석 보고서(문헌 인용이 포함된 피크 할당, 라이브러리 매칭, 신뢰도 평가 증거 체인)를 받을 수 있습니다.