What absorbs at 1950 cm⁻¹ in an FTIR spectrum?
A band near 1950 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Răspuns rapid
A band near 1950 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Nitrile | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 0 | 1,0 |
| Alkene (C=C) | 1 | 0 | 1,0 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Logica spectrului
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1950 cm⁻¹ is usually not enough for material identification by itself.
Utilizare în condiții reale
Acest tip de interogare este comun în identificarea polimerilor, screeningul materialelor plastice necunoscute, depanarea QC, verificarea materialelor reciclate și revizuirea atribuirii vârfurilor bazată pe literatură.
Greșeli comune
- Tratarea unei benzi izolate ca dovadă a unui material fără a verifica cel puțin unul sau două vârfuri de susținere.
- Ignorând suprapunerea: mai multe grupuri funcționale pot contribui în apropierea aceluiași număr de undă.
- Omiterea validării atunci când aditivii, amestecurile, oxidarea sau contaminarea pot distorsiona spectrul.
Sfat de verificare
Când ambiguitatea rămâne, validați ipoteza prin DSC, GC-MS sau TGA, în special pentru amestecuri, probe degradate și polimeri umpluți.
Literatura din spatele acestor atribuiri
-
Acetate încredere 1,0
“≅960+1000 combination band C=O stretching shoulder Weak 1950 SiO2 1880-1866 ≅697+1163 SiO2 combination band”
FTIR photoacoustic spectroscopy for identification and assessment of soil components_ Chernozems and their size fractions DOI: 10.1016/j.pacs.2020.100162 -
Carbonyl (C=O) încredere 1,0
“Although CO (or H Re-CO bands, if present, indicate larger clusters of Re on the cm-1 were found on CoRe(N), carbonyl bands around 1950 surface.”
Kumar 等 - 2011 - In Situ FT-IR Study on the Effect of Cobalt Precur DOI: 10.1021/jp104878e -
încredere 1,0
“Based on these former reports [56,57,62,66,67], as described 1950cm-1 above we assigned the new band at on Pt/C and 1960cm-1 on Pt-B to asymmetric bridged CO, CO(B) asym., which might be adsorbed on (100) terraces exposed on nano-”
Sato 等 - 2007 - Adsorptionoxidation of CO on highly dispersed Pt DOI: 10.1016/j.electacta.2007.05.007 -
Nitrile încredere 1,0
“cm-1 Three novel CO bands were detected at 1950, 1936, and 1927 alongside a larger number of cyanide bands.”
Infrared Characterization of the Bidirectional Oxygen-Sensitive [NiFe]-Hydrogenase from E. coli DOI: 10.3390/catal8110530 -
încredere 0,4
“Text: '1950cm-1 ν (M´' (incomplete, likely carbonyl stretching)”
Duchatelet 等 - 2009 - An approach to retrieve information on the carbony DOI: 10.1029//2005GL022386
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.