What absorbs at 1156 cm⁻¹ in an FTIR spectrum?
A band near 1156 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 1156 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 19 | 19 | 1,0 |
| Methoxy (OCH3) | 16 | 16 | 1,0 |
| Methacrylate | 16 | 16 | 1,0 |
| Acetate | 16 | 16 | 1,0 |
| Carbohydrate | 9 | 9 | 1,0 |
| Alkyl C-H | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| C c single bond | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 1 | 0,9 |
| Ester | 1 | 1 | 0,7 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| cellulose | 1156, 1735, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
| PPy | 1156, 1043, 910 | Methoxy (OCH3), Methacrylate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1156 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“0.14 0.01** Amide II 1542.34±1.54 1545.34±0.46 0.05* COO symmetric stretching 1396.38±2.09 1398.45±1.27 0.01** PO2 asymmetric stretching 1235.51±1.74 1250.20±0.57 0.01** C-O-C symmetric stretching 1156.29±1.22 1150.96±1.48 PO2 symmetric str”
Use of Fourier transform infrared spectroscopy for rapid comparative analysis of Bacillus and Micrococcus isolates DOI: 10.1016/j.foodchem.2008.08.063 -
Amide Vertrauen 1,0
“The presence of mode at were also sheep), the band of the amide III at 1156cm(cid:3)1, unclear to the researchers until they were appointed to a confirming the stabilshifted to wave number at amide's 100(cid:1) side chain (resonance of amin”
Hassan - 2019 - Fourier transform infrared spectroscopy to detect DOI: 10.1080/00387010.2019.1623262 -
Water (H2O) Vertrauen 1,0
“33O+ in Figure 3 is assigned to the absorption at 2366 similarly the quantity of RSO and H in equilibrium with combination of CF stretching vibrations at 1156 and 1212 that (C 0) of RSO 3H at the stage II when free water just cm-1.12 cm-1 T”
Iwamoto 等 - 2002 - Water in perfluorinated, sulfonic acid Nafion memb DOI: 10.1021/jp013709g -
Carbohydrate Vertrauen 1,0
“The characteristic bands of β-glucan are at 1156, 1076, 889cm-1.”
Liu 等 - 2006 - A study of the mushrooms of boletes by Fourier tra DOI: 10.1117/12.667136 -
Carbohydrate Vertrauen 1,0
“In the entire 1D-FTIR spectra, sixteen peaks herbs contain considerably quantity of starch which was were chosen as characteristic peaks and summarized in revealed from the characteristic peaks at 1156-”
Lu 等 - 2008 - Differentiation of Asian ginseng, American ginseng DOI: 10.1016/j.molstruc.2007.12.008 -
Acetate Vertrauen 1,0
“5, the TSX spectra showed a C-O-C band at 1156 and a cm-1 small broad peak at 1119 assigned to the C-OH as previously described [35].”
Sangfai 等 - 2015 - Preparation and characterization of kappa-carragee DOI: 10.1007/s00289-015-1360-1 -
Silicon (Si) Vertrauen 1,0
“The peaks in zeolite (1156 24.0 with 4.35 Å and 3.70 Å d-spacing values were associated with the cm(cid:0) 1) Si-O-Si 1054 could be because of stretching in bonds and charinterplanar spacing of PPy (Janaki et al., 2015;”
Polypyrrole/zeolite composite – A nanoadsorbent for reactive dyes removal from synthetic solution DOI: 10.1016/j.chemosphere.2021.132164 -
S eq o Vertrauen 1,0
“These new assignments at 1186 & 1011 cm-1 corresponded to -SO 3Na group while the bands in 1156 & 1149 region are due to S=O stretching 138 vibration.”
Radiation synthesis and characterization of super-absorbing hydrogel from natural polymers and vinyl monomer DOI: 10.1016/j.envpol.2018.07.129
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.