Was absorbiert bei 1036 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1036 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1036 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Silicon-oxygen (Si-O) | 12 | 12 | 1,0 |
| C-O single bond | 11 | 11 | 1,0 |
| Methoxy (OCH3) | 10 | 10 | 1,0 |
| Methacrylate | 10 | 10 | 1,0 |
| Acetate | 10 | 10 | 1,0 |
| Silicon (Si) | 5 | 5 | 1,0 |
| Siloxane (Si-O-Si) | 4 | 4 | 1,0 |
| Carbohydrate | 4 | 4 | 1,0 |
| S eq o | 3 | 3 | 1,0 |
| C c single bond | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Sulfonate | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Nitro (NO2) | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 0,9 |
| Oxygen heterocycle | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1036 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“The compressive strength of these samples was ated by the mass proportion of Na Available online 10 November 2009 1400cm(cid:2)1 have been attributed to asymmetric stretching of Al-O/Si-O the main peaks at 1036 and”
Compressive strength and microstructural characteristics of class C fly ash geopolymer DOI: 10.1016/j.cemconcomp.2009.11.003 -
Vertrauen 1,0
“The FT-IR spectrum as recorded in transmittance mode clearly showed characteristic peaks of diatom cm-1, biosilica, including for Si-O-Si stretching vibration at 1036.01 and 786.64 and O-H stretching of bound water cm-1, surface hydroxyl gr”
Mazumder 等 - 2014 - Structural and optical characterization of fresh w DOI: 10.1117/12.2039793 -
Alkyl C-H Vertrauen 1,0
“ECS Journal of Solid State Science and Technology, 6 (7) R88-R95 (2017) R91 cm-1 cm-1 The absorption band at 3450 and 1630 can be attributed bond.51 to the symmetric stretching and bending vibration of H-O-H Theabsorptionbandobtainedat1386c”
Mondal 和 Manam - 2017 - Structural and Luminescent Properties of Si4+ Co-D DOI: 10.1149/2.0021708jss -
Carboxyl (COOH) Vertrauen 1,0
“were present in both FTIR spectra of plant extract and FeNPs, such as alkyl halides, alkynes, aromatics and aliphatic amines, esters, ethers, alcohol, carboxylic acids, and nitro Nanomaterials2022,12,2404 11of25 compounds with peaks at 526.”
Green Synthesis and Characterization of Iron Nanoparticles Synthesized from Aqueous Leaf Extract of Vitex leucoxylon and Its Biomedical Applications DOI: 10.3390/nano12142404 -
Acetate Vertrauen 1,0
“It peaks at 1036 which is Preparation of PPG-Graft-St: Graft attributed to stretch vibrations of C - O - C and copolymerization was carried out in a 250 mL threeconfirm the point of grafting St unto PPG.”
Negim 等 - 2021 - Synthesis and characterization of polypropylene gl DOI: 10.31643/2021/6445.23 -
Silicon (Si) Vertrauen 1,0
“The cm-1 cm-1 peaks at 1036.41 and 1007.92 are ascribed to the Si-O deformation bands which are closer to that reported cm-1.”
Preparation and characterization of adsorbents derived from bentonite and kaolin clays DOI: 10.1007/s13201-018-0827-2 -
Carboxyl (COOH) Vertrauen 1,0
“Capping of =O' ion is reduced to by mainly '-OH' and ' cm-1 the nanoparticle comes from the absorption band at 1036 functional groups of saponins, anthraquinones and flavoC-O from stretch of alcohols, carboxylic acids, esters, ethers noids”
Enhancement of antibacterial activity through phyto‐fabrication of silver nanoparticles with Ficus thonningii aqueous extracts DOI: 10.1049/nbt2.12093 -
Vertrauen 1,0
“cm-1 are due to the C-Cl observed between 600 and 700 trum of the GO coated with APTES (fGO) gives charactercm-1 cm-1 stretching vibrations, the band at 1435 is assigned to istic absorption peaks at 1036 for Si-O-C bond and cm-1 cm-1 the CH”
Dynamic mechanical and optical characterization of PVC/fGO polymer nanocomposites DOI: 10.1007/s00339-018-2026-2
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.