Was absorbiert bei 1005 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1005 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1005 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Hydroxyl (O-H) | 4 | 3 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Silicon (Si) | 3 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Thiol | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1005 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carboxyl (COOH) Vertrauen 1,0
“Lastly, a peak at 1005 corresponding to the presence of presence of COO-), followed by another peak at 1020 cm-1, which represents the presence PO groups, was observed, which indicates the presence of carbonated hydroxyapatite in 4 of PO4 g”
Remineralization Potential of Three Restorative Glass Ionomer Cements: An In Vitro Study DOI: 10.3390/jcm12062434 -
Vertrauen 1,0
“As we notice from Figure 7, the decrease in the intensity of the main absorption band related to νas of Si-O-T (at 1005 cm-1) in the case of the SF-Cu2+ mix is further evidence of the geopolymerization retardation effect of copper ions.”
Ahmed 等 - 2023 - Immobilization Approach as a Creative Strategy to DOI: 10.3390/polym15071797 -
Acetate Vertrauen 1,0
“At 1005 was a C-O stretch of carbohydrate anhydrides [36].”
A Soluble Humic Substance for the Simultaneous Removal of Cadmium and Arsenic from Contaminated Soils DOI: 10.3390/ijerph16244999 -
Amide Vertrauen 1,0
“The band at 860 cm-1 was assigned to C-N stretching modes of cm-1 UiO-66-10BA and UiO-66-60BA samples contained a peak at 1005 associated with”
Butova 等 - 2023 - In Situ FTIR Spectroscopy for Scanning Accessible DOI: 10.3390/nano13101675 -
Hydroxyl (O-H) Vertrauen 1,0
“C-C-O stretching 1234 C-O stretching 1056 O-H stretching 1005”
Quantification of the Geranium Essential Oil, Palmarosa Essential Oil and Phenylethyl Alcohol in Rosa damascena Essential Oil Using ATR-FTIR Spectroscopy Combined with Chemometrics DOI: 10.3390/foods10081848 -
Thiol Vertrauen 1,0
“It can be known from relative articles (Bernard et al., 2017) figure that, the characteristic peak of M-S-H in the appears at 1005.4cm-1.”
Chen 等 - 2021 - Study on Metakaolin Impact on Concrete Performance DOI: 10.3389/fmats.2021.788079 -
Hydroxyl (O-H) Vertrauen 1,0
“As for the OH stretching bands, they enable a disfor the most intense peak and at ∼1005cm-1 crimination of the serpentine species from each other.”
Fritsch 等 - 2021 - Structural, textural, and chemical controls on the DOI: 10.5194/ejm-33-447-2021 -
Acetate Vertrauen 1,0
“Furthermore, the absorption bands which appeared at 1090, 1050 and 1005 cm-1 can be assigned to the asymmetric stretching vibration of C-O-C aliphatic ether function [15].”
Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium DOI: 10.3390/polym14153100
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.