Was absorbiert bei 973 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 973 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 973 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 6 | 6 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| C-O single bond | 2 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 0 | 1,0 |
| Methacrylate | 1 | 0 | 1,0 |
| Acetate | 1 | 0 | 1,0 |
| N-O bond | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Chitosan-Based | 973, 2924, 1743 | Alkyl C-H, C-O single bond | 1 |
| polypropylene | 973, 1030, 1600 | Alkyl C-H, C-O single bond | 1 |
| Chitosan | 973, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| PVC | 973, 834, 1195 | Alkyl C-H, C-O single bond | 1 |
| PVDF | 973, 1160, 840 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 973 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“C-CH involves the CH rocking, the stretching, the CH bending and the CH twisting -band at 998 3 3 2 cm1 modes in the crystalline phase, while the -band at 973 belongs to the CH rocking and the axial and 3”
Chen 等 - 2015 - The spatial correlation between crystalline and am DOI: 10.1007/s10118-015-1613-3 -
Vertrauen 1,0
“-1 cm-1 peak centred at 973 cm The shift of the Si-O stretching vibrations from 973 in PGV and PGN nanoclay was cm-1 attributed to the distinctive nanoplates of the tetra-hydrate in nanoclays to 1,019 in nanoclay-PAA solutions cm-1 layers o”
Fareed 和 Stamboulis - 2014 - Nanoclays reinforced glass ionomer cements disper DOI: 10.1007/s10856-013-5058-3 -
Vertrauen 1,0
“Apparently, the contained <2.0 wt% nanoclays, exhibited generally cm-1 slightly higher CS, similar DTS and FS compared Si-O stretching peak which was present at 973 to the control cement groups.”
Fareed 和 Stamboulis - 2014 - Nanoclay addition to a conventional glass ionomer DOI: 10.4103/1305-7456.143619 -
Alkyl C-H Vertrauen 1,0
“The out of plane C-H bending is shown by the band at 973 [23].”
Ramadan 和 Ismail - 2022 - Tunning the Physical Properties of PVDFPVCZinc F DOI: 10.21203/rs.3.rs-935328/v1 -
C c single bond Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Ramli 等 - 2019 - Synthesis, characterization, and morphology study DOI: 10.1007/s10965-019-1952-9 -
Alkene (C=C) Vertrauen 1,0
“The wavenumbers at 973 and 976 cm-1 can be assigned to secondary oxidation These results suggest that CBLO produced more trans double bonds and secondary oxiproducts, such as aldehydes or ketones, supporting isolated trans-double bonds [49]”
Chitosan-Based Anti-Oxidation Delivery Nano-Platform: Applications in the Encapsulation of DHA-Enriched Fish Oil DOI: 10.3390/md19080470 -
Alkyl C-H Vertrauen 1,0
“Because of the analogy between nanoclay composites revealed that the addition of nanoRaman and Fourier transform infrared (FTIR) methclays affected the absorption bands located at 973 and cm-1, ods, it was expected that FTIR spectroscopy co”
Fourier transform infrared spectroscopy and wide-angle X-ray scattering: Investigations on polypropylene–vapor-grown carbon nanofiber composites DOI: 10.1002/app.35576 -
Alkyl C-H Vertrauen 1,0
“The peaks at 973, 998, and 1168 were attributed to 3 -CH rocking vibration.”
Thin Film Mixed Matrix Hollow Fiber Membrane Fabricated by Incorporation of Amine Functionalized Metal-Organic Framework for CO2/N2 Separation DOI: 10.3390/ma14123366
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.