Was absorbiert bei 860 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 860 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 860 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 10 | 10 | 1,0 |
| Methoxy (OCH3) | 5 | 4 | 1,0 |
| Methacrylate | 5 | 4 | 1,0 |
| C-O single bond | 5 | 4 | 1,0 |
| Acetate | 5 | 4 | 1,0 |
| Metal oxygen | 4 | 4 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Silicon (Si) | 3 | 3 | 1,0 |
| Ring structure | 3 | 3 | 1,0 |
| C c single bond | 3 | 3 | 1,0 |
| Aldehyde (CHO) | 3 | 3 | 0,9 |
| Aromatic ring | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon carbon | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 0,8 |
| Carbonate | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 860 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“Two additional peaks unique to triethylene glycol (960-905 and 905cm21) were also compared to the peak area of the amide 860 III region to determine the accuracy of using the C-O stretches of TEG to determine relative changes in TEG content”
Changes in hydrogen bonding in protein plasticized with triethylene glycol DOI: 10.1002/app.42166 -
Metal oxygen Vertrauen 1,0
“Band ascribed to Ti-O-Ti chains formation”
Fast responsive anatase nanoparticles coated fiber optic pH sensor DOI: 10.1016/j.jallcom.2020.156246 -
Vertrauen 1,0
“X-Ray diffraction patterns showed that crystallization occurs by calcination above 973 A characteristic Raman peak at 860 cm-', assigned to the stretching vibration of short Ti-0 bonds, increased in intensity with increasing 0' irradiation”
Kohno 等 - 1996 - Preparation of BaTi4O9 by a sol-gel method and its DOI: 10.1039/JM9960601921 -
Alkyl C-H Vertrauen 1,0
“In addition to the three dom- (DNA, RNA and of polysaccharides) (Sano et al., 2016), and 860cm-1 C-H inating classes, the rest microbes at class level were most abundant in (aromatic bending vibration) (Huang et al., 2014).”
Fast start-up strategies of MBBR for mariculture wastewater treatment DOI: 10.1016/j.jenvman.2019.109267 -
Acetate Vertrauen 1,0
“The peaks occurring at 1164 cm in bambara starches may be 338 attributed to coupling mode of C-O and C-C stretching, while peaks at 860 and 928 could be 339 attributed to C-O stretching.”
Physicochemical properties of starches with variable amylose contents extracted from bambara groundnut genotypes DOI: 10.1016/j.carbpol.2015.06.100 -
Phosphate (PO4) Vertrauen 1,0
“Conformational changes were ascribed to bands at 860, 837, and 805 Our results consistently demonstrate the ability of asymmetric and symmetric phosphate vibrations in thin films to show significant band reshaping and intensity changes with”
Serec 等 - 2021 - Conformational Transitions of Double-Stranded DNA DOI: 10.3390/app11052360 -
Vertrauen 1,0
“vibrations of NiO6 and LiO6 octahedral units in the region 400 - 700 Moreover, FTIR cm-1 spectra for all the samples show peaks at 860 and 1430 associated with Ni-O bond.”
Taha 和 El-Molla - 2020 - Green simple preparation of LiNiO2 nanopowder for DOI: 10.1016/j.jmrt.2020.04.098 -
Hydroxyl (O-H) Vertrauen 1,0
“There was a co-existence of OH stretching (at 860”
Tangwiwat 和 Milne - 2005 - Barium titanate sols prepared by a diol-based sol- DOI: 10.1016/j.jnoncrysol.2004.12.008
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.